Pro-Ject
Showing all 9 resultsSorted by latest
AccessoriesPro-Ject measure it S2, High Precision Stylus Balance
The Measure it Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus trackingforces up to 5.0 grams in 0.001 gram increments. Each Measure it S2 can easily be calibrated with the included calibration weight. The Measure it S2 has a solid aluminum housing with a 4-digit LCD backlit display. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.
(0 reviews)
AccessoriesPro-Ject Audio – Record Puck – Heavy Record Stabilizer
Pro-Ject’s Record Puck is a heavyweight record clamp that is compatible with almost any turntable that doesn’t have a threaded spindle. It weighs approximately 1.7 lb and will help dampen vibration as well as holding your record in place on the platter. The Record Puck is made of metal with a powder coated black finish and felt on the bottom to protect your record.
(0 reviews)
AccessoriesPro-Ject Brush It, Antistatic Carbon Fiber Record Brush
New Pro-Ject Audio Systems Brush it Anti Static Record Cleaning Brush.
The perfect accessory for getting dust and other airborne materials out of your record’s grooves. Perfect for quick removal of dust, pet hair, and other light debris.- Carbon fiber brush for cleaning your LPs before each playback
- Conductive carbon fibers
- Eliminates static charges
- Removes fine dust particles
(0 reviews)
AccessoriesPro-Ject Audio – Connect it – Line Cable RCA-C – 1.23M
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
(0 reviews)
AccessoriesPro-Ject Align It Cartridge Alignment Gauge
Makes Cartridge Set-Up A Breeze, Allowing You To Quickly And Properly Align Your Cartridge
Tool for cartridge alignment and adjustment
Special slip-proof tool for defining the turning centre of Pro-Ject tonearms
Adaptable to accommodate differing tonearm lengths
Also suitable for other manufacturers’ tonearms
Suitable for tonearms between 8″ (203mm) and 12″(305mm) effective length
(0 reviews)
AccessoriesPro-Ject Audio Record Box E Phono Pre-Amp MM/MC
This introductory level phono stage is designed specifically to amplify your moving magnet or moving coil cartridge output to line level. The form factor of the unit is small and subtle, so it can be placed near the turntable/amp without being intrusive.
- Amplification and RIAA equalization for MM & MC ; Digitalization of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed; Runs on Windows and Mac OS operating systems
- SMD circuitry with special low noise components; Small size allows installation close to record player
- Gold plated RCA connection sockets; Outboard power supply included
- Input Impedance/Capacitance: MC: 100ohms/120pF (low output MC) / MM: 47kohms/120pF (MM or high output MC)
(0 reviews)
AccessoriesPro-Ject – Phono Box MM, stand alone phono stage for record player/ Pre-amp
Since many modern amplifiers no longer have a dedicated phono input, the phono box mm from Pro-Ject is the perfect addition to your turntable setup. Compatible with nearly any moving magnet cartridge, the phono box mm gives you a superb audiophile music experience at an entry-level price. The utilization of advanced circuitry keeps noise and distortion extremely low, and the metallic case and outboard DC power supply keeps the unit free from electromagnetic interference. Since it’s only slightly larger than a pack of playing cards, the phono box mm can be placed nearly anywhere. The RCA input and output sockets are gold-plated to preserve sound quality and can be connected directly to any line-level input (aux, CD, Etc.) on your amplifier.
(0 reviews)
AccessoriesPro-Ject Sweep It S2 Black Anti-Static Record Cleaning Arm
- Stabilisation using neodymium magnet
- Prevents the well-known running brush phenomenon of “skating”
- Adjustable in height, flexible positioning
- Natural hair brush with extremely low electronic negativity
- Cleans LPs during playback
There have been a broom since the early 70s and do their job sometimes well but less well. A commonly observed phenomenon is the so-called “storm”, or “skating”, the broom arm towards the center of the plate without running synchronously with the sampling needle. The latest developments therefore also consistently rely on measures that prevent exactly that. With the highly effective neodymium magnet a material has been available for quite some time, which can be used right here. Sweep it S2 was developed in collaboration with Klaus Mick and uses its patented principle to magnetically stabilize the broom An intensive research and development of technical and physical properties and empirical experimental arrangements have led to the product that you hold straight in your hands.
(0 reviews)
AccessoriesPro-Ject Audio – Grease it – Turntable Bearings Lubricant
Bearing lubricant
How to use Grease it
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Grease it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some grease off your turntable to keep it looking clean.
Please only use Grease it for turntables with inverted bearings, like RPM Line, Xtension models and Signature Line. For non-inverted bearings you should use Lube it.
(0 reviews)