Other
10 résultats affichés
AccessoriesPro-Ject Audio – Connect it – Line Cable RCA-C – 1.23M
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
(0 reviews)
AccessoriesPro-Ject Audio – Connect it Model Phono RCA-CC – 1.23M RCA-CC
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
(0 reviews)
AccessoriesPro-Ject Audio – Grease it – Turntable Bearings Lubricant
Bearing lubricant
How to use Grease it
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Grease it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some grease off your turntable to keep it looking clean.
Please only use Grease it for turntables with inverted bearings, like RPM Line, Xtension models and Signature Line. For non-inverted bearings you should use Lube it.
(0 reviews)
AccessoriesAudio Technica Headphone Hanger
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
(0 reviews)
AccessoriesAudio Technica Safety Raiser
Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights.
Specifications
Dimensions: 14 mm (0.55″) diameter × 27 mm (1.06″) to 39 mm (1.54″) height*
Lift bar movable width: 3 mm (0.12″)
Weight: Approx. 21 g (0.74 oz)
Accessories: Double-sided tape ×4, Spacer ×2 (14 mm (0.55″) diameter × 12 mm (0.47″) height; 14 mm (0.55″) diameter × 24 mm (0.94″) height)* In standby. Height can be adjusted by using the height-adjustment knob and included spacers.
(0 reviews)
AccessoriesAudio Technica Cartridge Storage Case
The AT6003R is designed to store three sets of headshells with mounted phono cartridges. The case holds the headshells securely in an upright position and includes three UV-protected capsules to cover the headshells/cartridges. A slit in the side of each capsule accommodates the headshell’s finger lift. Rubber feet on the bottom of the case provide increased stability.
Cartridges not included with the AT6003R.
(0 reviews)
AccessoriesMotorized VHS-C Cassette Adapter. Not Compatible with 8mm/MiniDV
VHS-C to VHS Videocassette Adapter. Enjoy your home movies instantly. This adapter lets you watch home movies recorded on a VHS-C or Super VHS-C videocassettes using a standard VHS VCR. So, you’ll no longer have to go through the hassle of connecting cables from your camcorder to your TV whenever you want to relive the special moments in your life. Does not work with or play: MiniDV, Hi8, Digital 8, and 8mm tapes. Requires 1 AA Battery (not included).
(0 reviews)