MON COMPTE
LISTE D’ENVIES
LISTE COMPARÉE
Salut.
Username*
Password*
Lost password?
Email*
New Highest quality turntable belt
The AT-LH11H is a universal ½ »-mount aluminum headshell that weighs only 11 grams – the lightest in the LH series – allowing it to be used with a wider range of cartridges on more turntables and tonearms than the other models.
With its non-threaded through-holes, the AT-LH11H is ideal for mounting cartridges with threaded mounting holes, such as the AT-OC9X, AT-ART9X, and VM95 Series cartridges. Like all LH models, this headshell has a hard anodized finish that reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. The headshell includes cartridge installation screws, plastic washers, and a hexagonal wrench.
The Vinyl Record Cleaner kit comes with Black Velvet stylus & Record cleaner and the Cleaning Fluid 2oz.
This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP444 is perfect for bringing your studio equipment’s phono-level output to a more suitable line-level output. It’ll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source, whether it’s a turntable, musical instrument or microphone. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You’ll find it easier to adjust the recording level volumes of different sources from microphones and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that’s not the case, the PP444 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP444 Preamplifier.
New Highest quality turntable belt, 16.9″/40,64 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.030″/ 0,076 Thick Turntable Belt
Audio Technica AT-LPW50, AT-LPW40WN, AT-LPW30 and AT-LP-DCVTA-EB replacement belt
Replacement Belt for Revolver Rebel Turntable
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .046 Inch / 1.2mm Thick and Wide 15.2 Inch / 38.1cm Inside Circumference (total length)
The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell.
Model number MP-700H JAN 4967736083577 output 4.0mV Frequency characteristic 20-27,000 Hz Load resistance 47kΩ Load capacity 100pF Cantilever boron with headshelldeadweight 26.3g Cartridge dead weight 8.0g Needle tip Microridge Solid Diamond Appropriate needle pressure 1.4 g Package Contents Cartridge body, needle cover, cartridge case, attached set (shell mounting screws, washer, nut, hex wrench, screwdriver), serial card, instruction manual
Nagaoka MP-110 the successor to the highly acclaimed and classic Nagaoka MP11 phono cartridge, the new Nagaoka MP-110 phono cartridge extends and strengthens its predecessor’s prowess and talents to a new level of radiance. You’ll hear more music, more detailed refinement The Nagaoka MP-110 is the cartridge to start with and to keep for a long time. Features -Superfine polished eliptical diamond bonded stylus -Powerfull samarium cobalt magnet -Lightweight aluminum alloy cantilever for high fidelity -Carbon fibre reinforced plastic shoe -Anti ferro magnetic permalloy shield casing. Stylus replacement: Nagaoka JN-P110 The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.
Main features Provides a lively, vigorous, and dynamic sound. Reproduces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 8 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Stylus specs Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
N-44-7 IMPROVED is attached to this cartridge Made in Japan
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
Specifications:
Type: Open-back reference
Driver: 45 mm
Sensitivity: 93.3dB/mW
Frequency response: 5 to 40,000 Hz
Maximum input power: 1,600mW
Impedance: 50 ohms
Input Jack: 3.5 mm (1/8″) Stereo Headphone Jack
Weight (without cable): Approx. 207g (7.3 oz)
Included accessories: ・Detachable cable (3.0 m (9.8’) / 3.5 mm (1/8”) gold-plated stereo mini-plug) ・Detachable cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug) ・6.3 mm (1/4”) stereo adapter ・Pouch
The M-Series ATH-M30x professional monitor headphones combine modern engineering and high-quality materials to deliver a comfortable listening experience, with enhanced audio clarity and sound isolation. Tuned for highly detailed audio, with strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
Type: Open-Back Reference
Sensitivity: 97 dB/mW
Frequency Response: 5 to 40,000 Hz
Maximum Input Power: 1,000 mW
Impedance: 470 ohms
Weight (Without Cables): Approx. 199 g (7.0 oz)
Included Accessories: ・Detachable cable (3.0 m (9.8’) / 3.5 mm (1/8”) gold-plated stereo mini-plug) ・6.3 mm (1/4”) stereo adapter ・Pouch
For product improvement, the product is subject to modification without notice.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 4,0 grams tracking pressure
0.7 mil Diamond conical tip needle , for 78rpm , 3,0 – 5.0 grams tracking pressure
0.7 mil Diamond Conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 4,0 grams tracking pressure
0.7 mil Diamond Conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 4,0 – 6,0 grams tracking pressure
Commandes expédiées en 24 heures
4 résultats affichés
M7Sub cartridge in grey with titanium headshell
