MON COMPTE
LISTE D’ENVIES
LISTE COMPARÉE
Salut.
Username*
Password*
Lost password?
Email*
Bubble shows turntable level at a glance to within 1 degree of accuracy, and test turntable platter speed Easy to use Tests 33-1/3 rpm, 45 rpm, and 78 rpm speeds Works on 50 Hz and 60 Hz diagram. Turntable Spirit Level Gauge Diameter 68mm Height 25mm Center Hole Diameter 7.5mm Weight 108grams
New Highest quality turntable belt
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
WEIGHT: 760 Grams MATERIAL: STAINLESS STEEL LOWER DIAMETER: 70 mm HIGHER DIAMETER: 28 mm HEIGHT: 20 mm
New high quality super elasticity rubber drive belt 21′ long x 0.20′ width x 0.02′ thick ( 544mm long x 5mm width x 0.5mm thick) Application: Fits most all 10′ to 13′ diameter platter turntables Can replace all 21′ to 24.5′ belts (170 to 200mm BELT), Perfect replacement or belt, specs equal or exceed original standards.
Turntable and phonograph record player Belt 21.4″
New Highest quality turntable belt, 25.7″ Inside Circumference x 0.200″ Wide x 0.027″ Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .046 Inch / 1.2mm Thick and Wide 15.75 Inch / 40cm Inside Circumference (total length)
Audio Technica VM Series dual magnet cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
High quality Diamond tip cartridge made by Grado
Four Piece OTL Cantilver Technology
Most Advanced DJ Cartridge Available
This is a very popular cartridge, found in most modern nostalgic type players. and dating back a decade or so across many brands. Notably Chou Denshi CZ-800 & Soundesign among others. Specs: Tracking Pressure: 2 – 4 grams Element: Ceramic .4 Volts Output
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
High quality Conical needle made by Tonar
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,25 – 2,0 grams tracking pressure
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,25 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 3,0 grams tracking pressure
Commandes expédiées en 24 heures
Voici le seul résultat
UMe – 00602445124992
T-Boy Records – 00602445124992
Tradecraft – 00602445124992
2 LPs, 180-Grams