MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
There have been a broom since the early 70s and do their job sometimes well but less well. A commonly observed phenomenon is the so-called “storm”, or “skating”, the broom arm towards the center of the plate without running synchronously with the sampling needle. The latest developments therefore also consistently rely on measures that prevent exactly that. With the highly effective neodymium magnet a material has been available for quite some time, which can be used right here. Sweep it S2 was developed in collaboration with Klaus Mick and uses its patented principle to magnetically stabilize the broom An intensive research and development of technical and physical properties and empirical experimental arrangements have led to the product that you hold straight in your hands.
You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
Turntable cleaner fluid 2 oz.
Turntable Cartridge 4 Piece Connector High-End Lead Wires Set with Gold connector. not twisted. Pack in PP box with foam inlay Mount on cartridge according to the color of shrink tubing: BLUE = LG (left ground) GREEN = RG (right ground) WHITE = L (left positive) RED = R (right positive) Specifications of High-End Lead Wires Sets Cable -Conductor: 7N Copper (OFC), 7-strands, Dia. 0.16mm, silver -Insulation Thickness: 0.41mm -Overall Dia.: 1.32mm -Conductor Resistance at 120 degree centigrade: 42.60Ohm/Kft Connector plug -7N Copper (OFC), GOLD connectors, Transparent Cable
New Highest quality turntable belt, 24.5″/62,23 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
New high quality super elasticity rubber drive belt 21′ long x 0.20′ width x 0.02′ thick ( 544mm long x 5mm width x 0.5mm thick) Application: Fits most all 10′ to 13′ diameter platter turntables Can replace all 21′ to 24.5′ belts (170 to 200mm BELT), Perfect replacement or belt, specs equal or exceed original standards.
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .025 Inch / .6mm Thick .203 Inch / 5.16mm Wide 20.7 Inch / 52.6cm Inside Circumference (total length)
Turntable and phonograph record player Belt22.4″
This is a very popular cartridge, found in most modern nostalgic type players. and dating back a decade or so across many brands. Noteably Chou Denshi CZ-800, & soundesign among others. Specs: Tracking Pressure: 2 – 4 grams Element: Ceramic .4 Volts Output
Main features Provides a lively, vigorous, and dynamic sound. Reproduces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 8 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Stylus specs Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
N-44-7 DJ Improved is attached to this cartridge
Made in Japan
Audio Technica VM Series dual magnet cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
The AT-OC9XEN Dual Moving Coil cartridge with nude elliptical stylus is designed to provide outstanding channel separation.
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
Pro DJ Performance
Hard working DJs require headphones for airtight performances. A quality set of headphones can be the difference between a good show and a great one. Our HF325 packs an incredible amount of sound quality into a compact, noise isolating design that won’t hog all of the space in your gig bag.
All about that bass
Starting with recording studio grade sound quality, the HF325 reveals the critical detail in your mix. The on-ear, noise isolating earcups reduce ambient noise to a minimum, making them ideal for use in loud club environments. The immediate, up-front sound signature is like a microscope for your ears. Vocals are intimate, bass is tight and punchy, and the subtle nuances in tracks are exposed with smooth, rich detail.
Hands and ears on the mix
The rotating earcup makes single-ear monitoring a cinch. No more pinching a stiff set of cans between your shoulder and cheek just to get a peek at the main mix and cue mix. We made it practical to keep your hands on the mix, not the headphones. A big upgrade from bundled and all-purpose headphones, the HF325 provides the features you need to perform at your best.
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
The M50x are one of our most acclaimed audio solutions and our best-selling headphones. Based on the ATH-M50, the M50x include an upgraded detachable cable for convenience and versatility, perfect for the studio, gaming or when you’re out on the move. Enjoy passive noise isolation through the comfortable ear cups designed to keep you in the zone and in the game, while their large aperture drivers deliver our industry-loved sound signature.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
VERTIGAIN TECHNOLOGY®
VERTIGAIN technology® allows recording in unparalleled broadcast quality, with up to 10% more clarity & accuracy than other USB microphones.
2 Recording Patterns
Cardioid and Omni-directional. For different application you can choose one of them. Cardioid mode mostly use for Vocal recording , omnidirectional mode for video conference or for meeting applications.
Diamond 0.3 x 0.7 mil bonded conical tip needle, 16 or 33 or 45rpm NOT for 78rpm , 1 – 2.5 grams tracking pressure.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5.0 grams tracking pressure
Diamond 0.6 mil conical tip needle, 1.0 – 1.5 grams tracking pressure. (1.25 nominal), 16, 33 or 45rpm, NOT for 78RPM.
Orders shipped within 24 hours
0.2 X 0.7 mil Diamond Elliptical tip needle, 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
$ 49.99
Black
Normarh, Ortofon
Elliptical
no
LM-10, LM10, OM-PRO, OMPRO, STD
1,5 – 2,5 grams
4541-DE, 759-DE
Replacement JNP110 stylus with spherical tip and aluminium alloy cantilever.Stylus: 0.4 x 0.7 Mil bonded elliptical diamond stylus tip
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 1,0 – 3,0 grams tracking pressure
Replacement JNP300 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip
Audio-Technica ATN-91R stylus specified forAT91R and CN5625AL cartridges, Special conical diamond tip for good fidelity ,06 Diamond conical Replacement Stylus with Bonded Round Shank , 2 – 4 grams tracking pressure