MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
10 BRASS TURNTABLE CARTRIDGE MOUNTING HARDWARE SET: 2 x 10mm screws, 2 x 14mm screws, 2 x 18mm screw, 2 x washers, 2 x nuts.
Tape Deck, Reel to Reel manual Head Demagnetizer The DEM1 head demagnetizer is easy to use and has the required magnetic field to properly demagnetize the magnetic heads and guides of almost all REEL TO REEL, TAPE DECK, VHS DECK and all other similar machines. It’s easy to use: plug into an 110 Volt AC socket, place the tip close to the recording head and use a slight rotary motion to cover the entire surface area of the head. Your machine will be demagnetized and will return to full and complete use. The DEM1 use a standard 110V AC. Please take a look at the picture below. Comes in sealed blister packaging. “CE” conform.
There have been a broom since the early 70s and do their job sometimes well but less well. A commonly observed phenomenon is the so-called “storm”, or “skating”, the broom arm towards the center of the plate without running synchronously with the sampling needle. The latest developments therefore also consistently rely on measures that prevent exactly that. With the highly effective neodymium magnet a material has been available for quite some time, which can be used right here. Sweep it S2 was developed in collaboration with Klaus Mick and uses its patented principle to magnetically stabilize the broom An intensive research and development of technical and physical properties and empirical experimental arrangements have led to the product that you hold straight in your hands.
You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
Turntable and phonograph record player Belt22.4″
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 19.6 Inch / 49.8cm Inside Circumference (total length)
NEW Genuine Pro-Ject Essential , Essential II & Essential III Replacement Drive Belt Also compatible with – Elemental/Elemental Phono USB – Primary/Primary Phono USB/Primary E – Essential/Essential Phono USB – Essential II/Essential II Phono USB/Essential II Digital – Essential III/Essential III A – George Harrison Record Player – VT-E – Xtension 9 – Juke Box E – Juke Box S2
New Highest quality turntable belt, 16.9″/40,64 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.030″/ 0,076 Thick Turntable Belt
ASTATIC 51-3 AMI ROCKOLA JUKEBOX 78 RPM only
This hand-built cartridge uses the acclaimed Gyger II nude diamond stylus. A fine-line elliptical type with a 6 µm small radius it gives smooth, extended highs, low distortion and reproduces a highly detailed and dynamic sound. Advanced diamond tip polishing ensures excellent tracking ability and reduces record wear. Because it fills the record groove more completely due to its larger major radius, the Gyger II represents a major upgrade over normal elliptical stylus types.
The VM760SLC special line contact stylus cartridge is the flagship model in Audio-Technica’s
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
Specifications:
Type: Open-Back Reference
Driver: 45 mm
Sensitivity: 97 dB/mW
Frequency Response: 5 to 40,000 Hz
Maximum Input Power: 1,000 mW
Impedance: 470 ohms
Input Jack: 3.5 mm (1/8″) Stereo Headphone Jack
Weight (Without Cables): Approx. 199 g (7.0 oz)
Included Accessories: ・Detachable cable (3.0 m (9.8’) / 3.5 mm (1/8”) gold-plated stereo mini-plug) ・6.3 mm (1/4”) stereo adapter ・Pouch
For product improvement, the product is subject to modification without notice.
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 2.5 grams tracking pressure
0.7 mil Diamond conical tip needle , for 78rpm , 3,0 – 5.0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5.0 grams tracking pressure
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 3,0 grams tracking pressure
Orders shipped within 24 hours
0,3 mil Diamond conical tip needle ,ONLY for 78rpm , 1.0 – 3,0 grams tracking pressure
$ 49.99
0.3 mil Diamond conical tip needle , ONLY for 78rpm , 1.0 – 3,0 grams tracking pressure
Normarh, Pfansthiel
Red
756-D2, 901-D3
There are no reviews yet.
Your email address will not be published. Required fields are marked *
Your review *
Name *
Email *
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 2,0 grams tracking pressure
Audio-Technica AT-VMN95C stylus specified for AT-VM95C cartridge, Special conical diamond tip for good fidelity , 0.6 mil Diamond Conical needle , 1.8 – 2.2 grams tracking pressure
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.25 grams tracking pressure
Reviews
There are no reviews yet.