MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
Connects to Turntable Output to ing Phono Level Up to Line Level12V DC Adaptor Included Load Impedance: 10K Ohms Reference Voltage: 1V Input Sensitivity / Impedance/PHONO 3 mV / 50K Ohms T.H.D. : 0.08 for 1 KHz 3 mV Input Output Level;2V S/N Ratio (with A-WTD);70 dB Frequency Response:20 Hz ~ 20 KHz ±2dB Dimensions (WHD):3.54″x2.13″ x1.02″ Weight : 0.88 Lbs Features Connects to Turntable Output to Bring Phono Level Up to Line Level – 12V DC 110V Adaptor Included Load Impedance: 10K Ohms – Reference Voltage: 1V d Input Sensitivity/Impedance/PHONO 3 mV / 50K Ohms – T.H.D: 0.08 for 1 KHz 3 mV Input – Output Level: 2V S/N Ratio (A-WTD): 70 dB – Frequency Response: 20 Hz ~ 20 KHz ±2dB Dimensions: (W)3.54″x (H)2.13″ x (D)1.02″ – Weight: 0.88 Lbs Connects to turntable Input Sensitivity: 3mV at 50K Ohms (phono) Output: 2V max (P-P) at 10K Ohms Includes power adapter 12V DC THD: 0.08% @ 1KHz and 3mV Input | S/N Ratio: 70dB | Frequency Response: 20Hz to 20KHz @ 2dB
turntable cleaner vinyl records spray
Bearing lubricant
How to use Grease it
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Grease it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some grease off your turntable to keep it looking clean.
Please only use Grease it for turntables with inverted bearings, like RPM Line, Xtension models and Signature Line. For non-inverted bearings you should use Lube it.
Turntable cleaner fluid 2 oz.
Turntable and phonograph record player Belt 14″
New high quality super elasticity rubber drive belt 24″ long x 0.20″ width x 0.02″ thick ( 610mm long x 5mm width x 0.5mm thick) Can replace all 24″ to 27″ belts, Perfect replacement or belt, specs equal or exceed original standards.
NEW CONNOISSEUR BD-1, BD-2, BD-2/A, BD-2/AR, BD-3 Round Turntable Belt. Top Quality, Long Lasting and Hard to find, RBS32.2 x 0.070″
New Highest quality turntable belt, 18.7″/47,49 cm Inside Circumference x 0.120″/ 0,30 cm Wide x 0.032″/ 0,081 Thick Turntable Belt
The Nagaoka MP-300 phonograph cartridge offers sophistication, refinement and high-definition at all audible frequencies thus making it one of our favorite phonograph cartridges. It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP300 is an advanced technology cartridge that is destined to become a classic out of the box. Features -Exclusive super rigid body for ultra resonance and superb fidelity -Superfine polished special eliptical bonded diamond stylus -Powerfull samarium cobalt magnet -Hardened low-mass, high strenght boron cantilever -Carbon fibre reinforced plastic shoe -Anti ferro magnetic permalloy shield casing Stylus replacement: Nagaoka JN-P300 The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.
The VM540ML MicroLine® stylus cartridge is the premier 500 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM540ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s MicroLine® stylus allows it to trace the record groove with incredible accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match. The stylus’s multilevel shape also wears better than other styli, while reducing the wear on your records.
Astatic 51-1 ASTATIC 51-2 AMI ROCKOLA JUKEBOX 33 45
The ATH-WS990BT wireless over-ear headphones combine exclusive 53 mm Deep Motion Drivers with large, high-flux magnetic circuitry and Bluetooth technology to deliver vibrant full-range wireless audio with invigorating bass. The powerful magnetic force of the circuitry results in dynamic, well-tailored diaphragm response to reproduce deep, clear low frequencies and detailed mid-to-high frequencies.
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
Package Content: Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
System Requirements: PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
0.2 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 3,0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 4,0 – 6,0 grams tracking pressure
Replacement JNP110 stylus with spherical tip and aluminium alloy cantilever.Stylus: 0.4 x 0.7 Mil bonded elliptical diamond stylus tip
Orders shipped within 24 hours
Showing the single result
High quality Conical needle made by Tonar