MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
This universal 1/2″-mount headshell for 4-pin turntable cartridges features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with color-coded headshell lead wires and cartridge mounting hardware. The AT-HS1 Universal Headshell fits both the AT-LP120-USB, AT-LP240-USB and AT-LP1240-USB Direct-Drive Professional Turntables.
Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights.
Specifications Dimensions: 14 mm (0.55″) diameter × 27 mm (1.06″) to 39 mm (1.54″) height* Lift bar movable width: 3 mm (0.12″) Weight: Approx. 21 g (0.74 oz) Accessories: Double-sided tape ×4, Spacer ×2 (14 mm (0.55″) diameter × 12 mm (0.47″) height; 14 mm (0.55″) diameter × 24 mm (0.94″) height)
* In standby. Height can be adjusted by using the height-adjustment knob and included spacers.
You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. If you have an empty round socket at the end of your tonearm then you can just get this headshell. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve. weighs approx 7gm
NEW Genuine Pro-Ject 2Xperience Replacement Drive Belt
New Highest quality turntable belt, 27.3″/69,34 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.024″/ 0,060 Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 19.6 Inch / 49.8cm Inside Circumference (total length)
High cost performance. Pop and jazz to the best high-performance, low-cost entry model MP-type stereo cartridge head shell with MP-100H ● output voltage: 5mV 5cm / sec
● frequency response: 20Hz ~ 20KHz
● Channel separation: 22dB 1KHz
● channel balance: 2.0dB following
● load resistance: 47KΩ ● load capacity: 100pF
● cantilever: aluminum alloy
● needle tip: 0.6mil cone and joining diamond
● proper needle pressure: 1.8 ~ 2.3g
● cartridge self-weight: 6.5g
● with head shell its own weight: 15.9g
High quality Elliptical cartridge made by Grado
Audio-Technica P- mount AT85EP phonograph cartridges, Special elliptical diamond tip for good fidelity ,0.3 x 0.7 mil elliptical needle , 1 – 1.5 grams tracking pressure
This is a very popular cartridge, found in most modern nostalgic type players. and dating back a decade or so across many brands. Noteably Chou Denshi CZ-800, & soundesign among others. Specs: Tracking Pressure: 2 – 4 grams Element: Ceramic .4 Volts Output
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
Pro DJ Performance
Hard working DJs require headphones for airtight performances. A quality set of headphones can be the difference between a good show and a great one. Our HF325 packs an incredible amount of sound quality into a compact, noise isolating design that won’t hog all of the space in your gig bag.
All about that bass
Starting with recording studio grade sound quality, the HF325 reveals the critical detail in your mix. The on-ear, noise isolating earcups reduce ambient noise to a minimum, making them ideal for use in loud club environments. The immediate, up-front sound signature is like a microscope for your ears. Vocals are intimate, bass is tight and punchy, and the subtle nuances in tracks are exposed with smooth, rich detail.
Hands and ears on the mix
The rotating earcup makes single-ear monitoring a cinch. No more pinching a stiff set of cans between your shoulder and cheek just to get a peek at the main mix and cue mix. We made it practical to keep your hands on the mix, not the headphones. A big upgrade from bundled and all-purpose headphones, the HF325 provides the features you need to perform at your best.
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
0.2 X 0.7 mil Diamond Elliptical tip needle, 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
Tip:Elliptical Stylus
Cartridge Number: M97ED, M97EJ
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5- 2.5 grams tracking pressure
Orders shipped within 24 hours
