MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
The highly-requested Spin-Clean SPINCLOTH drying cloths have returned!
Four times thicker, fluffier, softer, and more absorbent than the previous drying cloths, the new SPINCLOTH cloths remain easy-to-use, lint-free, and the washable.
Custom produced for Spin-Clean, the SPINCLOTH drying cloths offer even more absorbency when drying your just-cleaned vinyl. The SPINCLOTH drying cloths are non-abrasive and 100% cotton, adding the perfect finish to your “like-new” LPs and 45s.
Rewash cloths in washer with whites and bleach. Use one for cleaning and another for drying the record surface.
Qty: 1 package includes 5 drying cloths.
The AT-PEQ30 phono equalizer is designed specifically to add a phono stage to a turntable setup or to upgrade a turntable’s built-in phono preamplifier.
It is compatible with turntables with MM (moving magnet) and MC (moving coil) cartridges. The AT-PEQ30 benefits from Audio-Technica’s years of analog audio expertise and uses the finest quality parts in a layout that is optimized for low noise and minimum distortion.
This high quality record stabilizer is ideal for maintaining stability, and improving acoustic quality. Piano notes become crystal-clear, mid-range is vibrant and alive, while vocals soar realistically. High quality non-magnetic alloy weight Accommodate spindle diameter up to 7mm, heights up to 23mm Soft base pad assure protection of the record label Strobe scale support: 33rpm and 45rpm Product height: 33mm (1 5/16″) Product diameter: 77mm (3″) Product weight: 280g
Brand New turntable deluxe brush. This new brush is made of hundreds of thousands of carbon fibers. It works two ways on the record. Eliminating the static electricity of the record and it takes the dust out of the record grooves. Comes with clear case
Audio Technica AT-LPW50, AT-LPW40WN, AT-LPW30 and AT-LP-DCVTA-EB replacement belt
New high quality super elasticity rubber drive belt 24″ long x 0.20″ width x 0.02″ thick ( 610mm long x 5mm width x 0.5mm thick) Can replace all 24″ to 27″ belts, Perfect replacement or belt, specs equal or exceed original standards.
New Highest quality turntable belt, 38.8″ Inside Circumference x 0.158″ Wide x 0.025″ Thick Turntable Belt
Nagaoka MP-110 the successor to the highly acclaimed and classic Nagaoka MP11 phono cartridge, the new Nagaoka MP-110 phono cartridge extends and strengthens its predecessor’s prowess and talents to a new level of radiance. You’ll hear more music, more detailed refinement The Nagaoka MP-110 is the cartridge to start with and to keep for a long time. Features -Superfine polished eliptical diamond bonded stylus -Powerfull samarium cobalt magnet -Lightweight aluminum alloy cantilever for high fidelity -Carbon fibre reinforced plastic shoe -Anti ferro magnetic permalloy shield casing. Stylus replacement: Nagaoka JN-P110 The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves. Nagaoka Headshell genuine from Japan
High quality Diamond tip cartridge made by Grado
Three Piece OTL Cantilver Technology
Most Advanced DJ Cartridge Available
This 0.6 mil conical cartridge fits half-inch mount turntables. It features durable dual-magnet design, excellent channel separation and low distortion for outstanding tonal quality.
Coil impedance: 2.8 k ohms (1 kHz) DC resistance: 410 ohms Recommended load capacitance: 100 to 200 pF Coil inductance: 400 mH (1 kHz) Vertical tracking angle: 20° Dimensions: 17.0 mm (0.67″) H × 16.8 mm (0.66″) W × 31.0 mm (1.22″) D Weight: 5.0 g (0.17 oz)
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
The M50x are one of our most acclaimed audio solutions and our best-selling headphones. Based on the ATH-M50, the M50x include an upgraded detachable cable for convenience and versatility, perfect for the studio, gaming or when you’re out on the move. Enjoy passive noise isolation through the comfortable ear cups designed to keep you in the zone and in the game, while their large aperture drivers deliver our industry-loved sound signature.
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
Specifications:
Type: Open-back reference
Driver: 45 mm
Sensitivity: 93.3dB/mW
Frequency response: 5 to 40,000 Hz
Maximum input power: 1,600mW
Impedance: 50 ohms
Input Jack: 3.5 mm (1/8″) Stereo Headphone Jack
Weight (without cable): Approx. 207g (7.3 oz)
Included accessories: ・Detachable cable (3.0 m (9.8’) / 3.5 mm (1/8”) gold-plated stereo mini-plug) ・Detachable cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug) ・6.3 mm (1/4”) stereo adapter ・Pouch
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,25 – 2,0 grams tracking pressure
High quality Elliptical needle made by Grado
Manufacturer : SHURE Super Analog Stylus (SAS) Profile Tip The tip of the is carefully chosen from single-crystal natural diamonds. The laser-cut diamond closely resembles that of the cutting stylus used on a cutting lathe to produce the acetate master disks used in vinyl production. This allows the SAS tip to reach into the deepest recesses of the record groove in order to retrieve details which were previously inaccessible to other stylus profiles. Due to its wide contact area with the groove wall, the SAS can reproduce a more expansive bandwidth of information with higher fidelity. Cantilever is one of the most suitable materials for cantilevers. its density is low, Young’s modulus is large, and the speed of sound propagation is approximately 2.6 times faster than that of aluminum. Due to the characteristics above, boron cantilever can more precisely trace the information contained in the record grooves than aluminum cantilever.
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 grams tracking pressure
LABEL : MOVLP3823
LABEL : WRJ001
Orders shipped within 24 hours
High quality Conical needle made by Tonar
$ 24.95
Tonar
ST5
There are no reviews yet.
Your email address will not be published. Required fields are marked *
Your review *
Name *
Email *
Audio Technica VMN30EN stylus specified for VM530EN Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
Replacement JNP200 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip
Replacement JNP300 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.25 grams tracking pressure
Reviews
There are no reviews yet.