High quality Elliptical cartridge made by Grado
Cartridges
Showing 49–72 of 103 results
- Cartridges
Goldring E2
Goldring E2
The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.
The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.
(0 reviews)$ 199.95 Add to cart - Cartridges
Goldring E3
Goldring E3
The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.
The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings
(0 reviews)$ 259.99 Add to cart - Audio Technica
AUDIO-TECHNICA VM540ML MICROLINE DUAL MOVING MAGNET STEREO TURNTABLE CARTRIDGE
The VM540ML MicroLine® stylus cartridge is the premier 500 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM540ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s MicroLine® stylus allows it to trace the record groove with incredible accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match. The stylus’s multilevel shape also wears better than other styli, while reducing the wear on your records.
(0 reviews)$ 368.95 Add to cart - Cartridges
Universal STANDARD-Mount PANASONIC EPC-42STAD CARTRIDGE WITH STYLUS
Standard Mount Cartridge, Replaces Panasonic EPC-42 STAD, EV 5564D, Arista 1497D, and EPC-STAB
Use Pfanstiehl stylus 627-D7.(0 reviews)$ 29.95 Add to cart - Audio Technica
Audio-Technica VM670SP Dual Moving Magnet Mono 78 RPM Phonograph Cartridge
With a specialized body and internal wiring dedicated to monaural sound reproduction, plus a large curvature radius conical stylus, the VM670SP cartridge is designed for playing 78 RPM records. Part of the 600 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges – the VM670SP is equipped with dual magnets that are internally connected to reduce record noise and obtain a highly focused “center” sound image that stereo cartridges can’t provide. The stylus’s 3.0 mil curvature radius makes it an excellent choice for playing 78s from a wide variety of eras. Includes mounting hardware.
VM dual magnet cartridge with 3.0 mil conical stylus
Aluminum cantilever
Paratoroidal coils improve generating efficiency
Mono body terminating left and right channels reduces surface noise
Durable low-resonance polymer housing
Accessories Included
Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts(0 reviews)$ 218.95 Add to cart - Audio Technica
Audio-Technica VM740ML MicroLine Dual Moving Magnet Stereo Turntable Cartridge
The VM740ML Micro line stylus cartridge is a premier 700 Series VM740ML in Audio-Technica’s New VM cartridge line – a line that harks back to A-T’s Early days as a manufacturer primarily of high-end phono cartridges while also incorporating today’s advanced technology Like all VM cartridges the VM740ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response The cartridge’s Micro line stylus allows it to Trace the record groove with incredible accuracy resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match The stylus’s multilevel shape also wears better than other styli while reducing the wear on your records Includes mounting hardware
(0 reviews)$ 498.95 Add to cart - Audio Technica
Audio Technica VM530EN/H Phonograph Cartridge with Headshell
- Dual magnets match the left and right channels in a stereo record groove for outstanding channel separation and extended frequency response
- Elliptical nude stylus reduces the execution mass of the vibration system, enabling fuller frequency reproduction and less tracking distortion than a bonded stylus
- Paratoroidal coils improve generating efficiency
- Center shield plate between the left and right channels reduces crosstalk
- Durable low-resonance polymer cartridge housing
- Includes aluminum cantilever and mounting hardware
- Universal ½”-mount headshell for 4-pin turntable cartridges
(0 reviews)$ 328.95 Add to cart - Audio Technica
Audio Technica AT91 Phonograph Cartridge
This 0.6 mil conical cartridge fits half-inch mount turntables. It features durable dual-magnet design, excellent channel separation and low distortion for outstanding tonal quality.
Frequency Response 20-20,000 Hz Channel Separation 18 (dB at 1 kHz) Vertical Tracking Force 1.5-2.5 g (2.0 g standard) Stylus Construction Bonded round shank Recommended Load Impedance 47,000 ohms Output 3.5 mV (1 kHz, 5 cm/sec.) Channel Balance 2.5 dB (1 kHz) Stylus Shape 0.6 mil conical Cantilever Carbon fiber-reinforced ABS Mount Half-inch Replacement Stylus ATN91 ATN3600 Coil impedance: 2.8 k ohms (1 kHz)
DC resistance: 410 ohms
Recommended load capacitance: 100 to 200 pF
Coil inductance: 400 mH (1 kHz)
Vertical tracking angle: 20°
Dimensions: 17.0 mm (0.67″) H × 16.8 mm (0.66″) W × 31.0 mm (1.22″) D
Weight: 5.0 g (0.17 oz)(0 reviews)$ 49.95 Add to cart - Nagaoka
Nagaoka MP-110H Phonograph Cartridge With Headshell
Nagaoka MP-110 the successor to the highly acclaimed and classic Nagaoka MP11 phono cartridge, the new Nagaoka MP-110 phono cartridge extends and strengthens its predecessor’s prowess and talents to a new level of radiance. You’ll hear more music, more detailed refinement The Nagaoka MP-110 is the cartridge to start with and to keep for a long time. Features -Superfine polished eliptical diamond bonded stylus -Powerfull samarium cobalt magnet -Lightweight aluminum alloy cantilever for high fidelity -Carbon fibre reinforced plastic shoe -Anti ferro magnetic permalloy shield casing. Stylus replacement: Nagaoka JN-P110 The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves. Nagaoka Headshell genuine from Japan
(0 reviews)$ 274.95 Add to cart - Grado
Grado Disc Jockey Series DJ100, DJ100i, Phonographe Cartridge
High quality Diamond tip cartridge made by Grado
Three Piece OTL Cantilver Technology
Most Advanced DJ Cartridge Available
- Type : Moving Magnet
- Mounting : 1/2”
- Frequency Response: 10-50
- Principal: MI
- Channel Separation at 1KHz: 30
- Input Load: 47K
- Output at 1KHz 5CM/sec.: 5mV
- Recommended Tracking Force: 2.5
- Stylus Type: Diamond
- Inductance: 45mH
- Resistance: 475
- Compliance CUs: 30
- Stylus Replacement: U
- Mounting: S/P
- Weight: 5.5
(0 reviews)$ 169.95 Add to cart - Grado
Grado Disc Jockey Series DJ200, DJ200i, Phonographe Cartridge
High quality Diamond tip cartridge made by Grado
Four Piece OTL Cantilver Technology
Most Advanced DJ Cartridge Available
- Type : Moving Magnet
- Mounting: 1/2”
- Frequency Response: 10-50
- Principal: MI
- Channel Separation at 1KHz: 30
- Input Load: 47K
- Output at 1KHz 5CM/sec.: 5mV
- Recommended Tracking Force: 2.5
- Stylus Type: Diamond
- Inductance: 45mH
- Resistance: 475
- Compliance CUs: 30
- Stylus Replacement: U
- Mounting: S/P
- Weight: 5.5
(0 reviews)$ 219.95 Add to cart - Grado
Grado Prestige Series Green 3 Phonographe Cartridge
- Frequency Response: 10-50
- Principal: MI
- Channel Separation at 1KHz: 30
- Input Load: 47K
- Output at 1KHz 5CM/sec.: 5mV
- Recommended Tracking Force: 1.5
- Stylus Type: E
- Type : Twin Magnet System
- Mounting: 1/2”
- Inductance: 45mH
- Resistance: 475
- Compliance CUs: 20
- Stylus Replacement: U
- Mounting: S/P
- Weight: 5.5
(0 reviews)$ 169.95 Add to cart - Grado
Grado Prestige Series Blue 3 Phonographe Cartridge
High quality Elliptical cartridge made by Grado
- Frequency Response: 10-55
- Principal: MI
- Channel Separation at 1KHz: 30
- Input Load: 47K
- Output at 1KHz 5CM/sec.: 5mV
- Recommended Tracking Force: 1.5
- Stylus Type: E
- Type: Twin Magnet System
- Mounting: 1/2”
- Inductance: 45mH
- Resistance: 475
- Compliance CUs: 20
- Stylus Replacement: U
- Mounting: S/P
- Weight: 5.5
(0 reviews)$ 229.95 Add to cart - Grado
Grado Prestige Series Red 3 Phonographe Cartridge
High quality Elliptical cartridge made by Grado
- Frequency Response: 10-55
- Principal: MI
- Channel Separation at 1KHz: 30
- Input Load: 47K
- Output at 1KHz 5CM/sec.: 5mV
- Recommended Tracking Force: 1.5
- Stylus Type: E
- Type: Twin Magnet System
- Mounting: 1/2”
- Inductance: 45mH
- Resistance: 475
- Compliance CUs: 20
- Stylus Replacement: U
- Mounting: S/P
- Weight: 5.5
(0 reviews)$ 269.95 Add to cart - Grado
Grado Prestige Series Silver 3 Phonographe Cartridge
High quality Elliptical cartridge made by Grado
- Frequency Response: 10-60 khz
- Principal: MI
- Channel Separation at 1KHz: 35
- Input Load: 47 kohms
- Output at 1KHz 5CM/sec.: 5mV
- Recommended Tracking Force: 1.5 grams
- Stylus Type: E
- Type : Twin Magnet System
- Mounting: 1/2”
- Inductance: 45mH
- Resistance: 475 ohms
- Compliance CUs: 20
- Stylus Replacement: U
- Mounting: S/P
- Weight: 5.5 grams
(0 reviews)$ 329.95 Add to cart - Grado
Grado Prestige Series Gold 3 Phonographe Cartridge
High quality Elliptical cartridge made by Grado
- Frequency Response: 10-60 khz
- Principal: MI
- Channel Separation at 1KHz: 35
- Input Load: 47 kohms
- Output at 1KHz 5CM/sec.: 5mV
- Recommended Tracking Force: 1.5 grams
- Stylus Type: E
- Type : Twin Magnet System
- Mounting: 1/2”
- Inductance: 45mH
- Resistance: 475 ohms
- Compliance CUs: 20
- Stylus Replacement: U
- Mounting: S/P
- Weight: 5.5 grams
(0 reviews)$ 369.95 Add to cart - Audio Technica
Audio Technica AT-VM95SP 78 RPM Phonograph Cartridge
This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
(0 reviews)$ 109.99 Add to cart - Audio Technica
Audio Technica AT-VM95SH Phonograph Cartridge
The Audio-Technica Consumer AT-VM95SH Dual Moving Magnet Cartridge features a special coil design, which delivers a powerful output level with high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2″ mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required).
The Shibata stylus has two radii, similar to an elliptical stylus, but longer and more narrow. This allows for more surface contact and effective pickup of ultra-high frequencies with less groove stress or distortion. All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli. The Audio-Technica Consumer AT-VM95SH ships with mounting hardware and a non-magnetic screwdriver.
- VM dual magnet cartridge with 2.7 x 0.26mm Shibata stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws—no nuts or washers required
- Compatible with any AT-VMN95 replacement stylus
(0 reviews)$ 298.95 Add to cart - Audio Technica
Audio Technica AT-VM95ML Phonograph Cartridge
This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
(0 reviews)$ 209.95 Add to cart - Cartridges
Cartridge Chuo Denshi CZ800, CZ-800, P-190D
This is a very popular cartridge, found in most modern nostalgic type players. and dating back a decade or so across many brands. Noteably Chou Denshi CZ-800, & soundesign among others. Specs: Tracking Pressure: 2 – 4 grams Element: Ceramic .4 Volts Output
(0 reviews)$ 49.99 Add to cart - Cartridges
Replacement Cartridge for Victrola ITNP-Y2
This is a very popular cartridge, found in most modern nostalgic type players. and dating back a decade or so across many brands. Noteably Chou Denshi CZ-800, & soundesign among others. Specs: Tracking Pressure: 2 – 4 grams Element: Ceramic .4 Volts Output
(0 reviews)$ 34.95 Add to cart