This new brush is made of hundreds of thousands of carbon fibers.It works two ways on the record. Eliminating the static electricity of the record and it takes the dust out of the record grooves.
The new PS2 MM phono preamp sounds very good and looks classy as well. It features all discrete circuitry and a very accurate RIAA curve. The gain is variable by a front panal volume control and is capable of up to 47 dB gain. This solves the age old complaint of volume between phono and other input sources. The front panel is brushed aluminum with an instrument grade power toggle switch. A basic RCA cable and mini plug are included in the package.
Superior audio performance
Front panel power on/off switch
Extemely accurate frequency response
OFC gold plated RCA cables included
Input and output via gold-plated RCA jacks
Sub-sonic filter to reduce deep rumble and wasted amplifier
All-steel case construction with LED power indicator and groud wire connection terminal
High current outboard power supply for low noise and improved audio dynamics
Variable output control for matching the turntable volume level to other connected audio sources
Extra 7dB “Boost” option available for use with very low output cartridges
RIAA Frequency Response: 20-20 kHz, +/- 0.5 dB
Sub Sonic Filter: 7 Hz
Signal-To-Noise Ratio: 80 dBA
Total Harmonic Distortion: 0.06%
Input Impedance: 47 kOhms/220 pF
Output Impedance: 600 Ohms
Gain: 40 dB nominal, plus up to 7 dB gain
BoostSensitivity – normal range: 3.0 mV (with volume control up to 2 o’clock position)
Sensitivity – “Boost” range: 1.5 mV (with volume control past 2 o’clock position/Boost mode)
Overload: 30 mV (20 dB)
Maximum Output: 3.5 Volts
Crosstalk (20-20 kHz): >55 dB
Aluminium Alloy body
OFC litz lead wires with gold plated terminals
Gold plated pins
9.1 grams without screws
Fixing screws included
You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
New Highest quality turntable belt, 25.7″ Inside Circumference x 0.200″ Wide x 0.027″ Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .046 Inch / 1.2mm Thick and Wide 15.75 Inch / 40cm Inside Circumference (total length)
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 20.0 Inch / 50.8cm Inside Circumference (total length
New Highest quality turntable belt, 34.0″/86,36 cm Inside Circumference x 0.196″/ 0,49 cm Wide x 0.031″/ 0,078 Thick Turntable Belt
The Nagaoka MP-500H MM phonograph cartridge offers the highest musical and creative expression of the new MP series. It expertly extracts and reproduces with vivid, colorful and dimensional clarity what others miss. Meet our little friend – the Nagaoka MP-500 phonograph cartridge – the master of the grooves.
Exclusive super rigid body for ultra resonance and superb fidelity
Superfine line contact diamond stylus
Powerful samarium cobalt magnet
Low-mass, high strength boron cantilever
Carbon fibre reinforced plastic body
Type: Moving magnet
Cantilever: High-strength Boron
Stylus type: Superfine line contact diamond
Cartridge weight: 8.0 g
Head shell’s weight: 13.5 g
Output voltage @ 1kHz,5cm/sec: 3mV
Frequency response: 20Hz-25kHz
Channel balance @ 1kHz: > 1dB
Channel separation @ 1kHz: > 27dB
Recommended loading: 47k ohms
Dynamic compliance: 8.5 x 10-6 cm/dyne
Tracking force range: 1.3 – 1.8 g
Stylus replacement: Nagaoka JN-P500
Excellent quality at a reasonable price.
Includes both cartridge and stylus. Cartridge is 1/2″ headshell mountable; the stylus has a 0.6mm spherical diamond tip. Cartridge has a tracking force of 2.5g to 3.5g. Channel separation is 26dB at 1kHz. Output: 2.4Mv.
0.6mm spherical diamond tip Tracking force: 2.5g to 3.5g Channel separation: 26dB at 1kHz Output: 2.4Mv
Audio-Technica P- mount AT81CP phonograph cartridges, Special conical diamond tip for good fidelity , 0.6 mil Diamond conical needle , 1 – 1.5 grams tracking pressure
The Audio-Technica Consumer AT-VM95SH Dual Moving Magnet Cartridge features a special coil design, which delivers a powerful output level with high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2″ mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required).
The Shibata stylus has two radii, similar to an elliptical stylus, but longer and more narrow. This allows for more surface contact and effective pickup of ultra-high frequencies with less groove stress or distortion. All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli. The Audio-Technica Consumer AT-VM95SH ships with mounting hardware and a non-magnetic screwdriver.
The ATH-WS990BT wireless over-ear headphones combine exclusive 53 mm Deep Motion Drivers with large, high-flux magnetic circuitry and Bluetooth technology to deliver vibrant full-range wireless audio with invigorating bass. The powerful magnetic force of the circuitry results in dynamic, well-tailored diaphragm response to reproduce deep, clear low frequencies and detailed mid-to-high frequencies.
The Klipsch T5M Wired Earphones offer superior comfort and unparalleled acoustic quality on-the-go.
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 1.0 – 3.0 grams tracking pressure
1.5 x 0.28 – Special Line Contact Replacement Stylus for these cartridges:
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 0,75 – 1,5 grams tracking pressure
High quality Conical needle made by Tonar
Orders shipped within 24 hours