MON COMPTE
LISTE D’ENVIES
LISTE COMPARÉE
Salut.
Username*
Password*
Lost password?
Email*
You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
There have been a broom since the early 70s and do their job sometimes well but less well. A commonly observed phenomenon is the so-called “storm”, or “skating”, the broom arm towards the center of the plate without running synchronously with the sampling needle. The latest developments therefore also consistently rely on measures that prevent exactly that. With the highly effective neodymium magnet a material has been available for quite some time, which can be used right here. Sweep it S2 was developed in collaboration with Klaus Mick and uses its patented principle to magnetically stabilize the broom An intensive research and development of technical and physical properties and empirical experimental arrangements have led to the product that you hold straight in your hands.
This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP444 is perfect for bringing your studio equipment’s phono-level output to a more suitable line-level output. It’ll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source, whether it’s a turntable, musical instrument or microphone. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You’ll find it easier to adjust the recording level volumes of different sources from microphones and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that’s not the case, the PP444 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP444 Preamplifier.
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
Brand New turntable beltThis is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .025 Inch / .6mm Thick .203 Inch / 5.16mm Wide 25.0 Inch / 63.5cm Inside Circumference (total length)
New Highest quality turntable belt, 17.2″/43,68 cm Inside Circumference x 0.157″/ 0,40 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
NEW Genuine Pro-Ject Essential , Essential II & Essential III Replacement Drive Belt Also compatible with – Elemental/Elemental Phono USB – Primary/Primary Phono USB/Primary E – Essential/Essential Phono USB – Essential II/Essential II Phono USB/Essential II Digital – Essential III/Essential III A – George Harrison Record Player – VT-E – Xtension 9 – Juke Box E – Juke Box S2
High quality Elliptical cartridge made by Grado
The Audio-Technica Consumer AT-VM95SH Dual Moving Magnet Cartridge features a special coil design, which delivers a powerful output level with high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2″ mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required).
The Shibata stylus has two radii, similar to an elliptical stylus, but longer and more narrow. This allows for more surface contact and effective pickup of ultra-high frequencies with less groove stress or distortion. All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli. The Audio-Technica Consumer AT-VM95SH ships with mounting hardware and a non-magnetic screwdriver.
Phonograph stereo cartridge with stylus, needle guard and mounting bracket, Pfanstiehl P-132D, EV 5208D, 5208, 5126, 5126D. Replaces: Varco TN4A, TN4B, TN4BD, TN-4A, TN-4B, TN-4BD, EV 5126, EV 5126D, EV 5208, EV 5208D Astatic 17, Astatic 17D, Astatic 155, Pfanstiehl P-226, Pfanstiehl P-226D. Uses 864 needle. Ceramic, 0.5 volts output. This is a great universal replacement cartridge for requirements of 0.5 volts output. Will support 33, 45 and 78 RPM. Brand new. Commonly used to replace cartridges in: Rockola 404, Rockola 408, Rockola 414, Rockola 418, Rockola 430, Rockola 431, Rockola 434, Rockola 435, Rockola 441, Rockola 443, Rockola 445, Rockola 1468, Rockola 1475, Rockola 1478, Rockola 1485, Rockola 1488, Rockola 1493, Rockola 1496, Rockola 1497 jukeboxes. Will also replace cartridges in many Wurlitzer and AMI Rowe jukeboxes.
Excellent quality at a reasonable price. Includes both cartridge and stylus. Cartridge is 1/2″ headshell mountable; the stylus has a 0.6mm spherical diamond tip. Cartridge has a tracking force of 2.5g to 3.5g. Channel separation is 26dB at 1kHz. Output: 2.4Mv. Features: 0.6mm spherical diamond tip Tracking force: 2.5g to 3.5g Channel separation: 26dB at 1kHz Output: 2.4Mv
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
The M50x are one of our most acclaimed audio solutions and our best-selling headphones. Based on the ATH-M50, the M50x include an upgraded detachable cable for convenience and versatility, perfect for the studio, gaming or when you’re out on the move. Enjoy passive noise isolation through the comfortable ear cups designed to keep you in the zone and in the game, while their large aperture drivers deliver our industry-loved sound signature.
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
3 mil Diamond conical tip needle, for 78rpm , 2 – 4 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 3,0 grams tracking pressure
.0007 Diamond tip, 16 33 & 45 RPM Only.
0.4 X 0.7 mil Diamond conical tip needle , 33 or 45rpm NOT for 78rpm.
Commandes expédiées en 24 heures