This Thorens support weight ensures excellent pressure distribution on the record. This optimizes the contact surface of the record with the felt or rubber mat. So even problematic LPs will sound better. Features: diameter approx. 69 mm. Height: approx. 28 mm. Weight: approx. 550 g in elegant wooden box
| Poids | 550 g |
|---|---|
| Genuine |
Connects to Turntable Output to ing Phono Level Up to Line Level12V DC Adaptor Included Load Impedance: 10K Ohms Reference Voltage: 1V Input Sensitivity / Impedance/PHONO 3 mV / 50K Ohms T.H.D. : 0.08 for 1 KHz 3 mV Input Output Level;2V S/N Ratio (with A-WTD);70 dB Frequency Response:20 Hz ~ 20 KHz ±2dB Dimensions (WHD):3.54″x2.13″ x1.02″ Weight : 0.88 Lbs Features Connects to Turntable Output to Bring Phono Level Up to Line Level – 12V DC 110V Adaptor Included Load Impedance: 10K Ohms – Reference Voltage: 1V d Input Sensitivity/Impedance/PHONO 3 mV / 50K Ohms – T.H.D: 0.08 for 1 KHz 3 mV Input – Output Level: 2V S/N Ratio (A-WTD): 70 dB – Frequency Response: 20 Hz ~ 20 KHz ±2dB Dimensions: (W)3.54″x (H)2.13″ x (D)1.02″ – Weight: 0.88 Lbs Connects to turntable Input Sensitivity: 3mV at 50K Ohms (phono) Output: 2V max (P-P) at 10K Ohms Includes power adapter 12V DC THD: 0.08% @ 1KHz and 3mV Input | S/N Ratio: 70dB | Frequency Response: 20Hz to 20KHz @ 2dB
Generic Black Aluminum SME type Stanton Headshell, weighs approx 7gms
This is a Philmore Phono Pre-Amplifier model PHIPRE600. This stereo/phono pre-amplifier will allow you to replace a crystal or ceramic stereo cartridge with a better quality magnetic stereo cartridge while using the original stereo amplifier supplied with your turntable. The use of this pre-amplifier in conjunction with a magnetic cartridge will give you CD quality sound out of your vintage turntable. This pre-amplifier will allow you to take phono signals to line-level. Use this to amplify and interface with mixers, main or monitor systems, audio workstations or sound cards. Uses standard RCA-RCA dual phono cables (not included) with easy in/out plug-ins and works with all magnetic cartridges. This pre-amplifier allows the use of turntables on newer equipment not having a discrete “Phono” input. With this device you can plug into newer equipment using their AUX, DVD, TAPE or CD line level inputs. Features: Convert Phono signal to line level Works with turntables using a magnetic cartridge Good for transferring your old LPs to digital media storage Frequency response: 30-20K Impedance: 50K Ohms Gain: 50X (in+5V out) Max Output: 1.8V Max input: 30mV S/N Ratio: Over 60dB Power requirements 117VAC, 50/60 Hz, 0.1 Watt
You will receive a premium quality black aluminum headshell fits any S-Shaped or J-Shaped tone-arms. It will fit many brands including Pioneer, Yamaha, Marantz, Technics, Panasonic, Sony, etc, and comes with new wires also. Bayonet style, 1/2″ mount cartridges. The four pins seen on the end make contact with the lead wires seen inside the tonearm.