MON COMPTE
LISTE D’ENVIES
LISTE COMPARÉE
Salut.
Username*
Password*
Lost password?
Email*
This convenient record stand will allow you to place your 12″ record album, LP securely over its spindle allowing for quick and even drying after washing on both sides. Provides a 3/4″ elevation, padded felt bottom, 4.7/8″ diameter
The new PS2 MM phono preamp sounds very good and looks classy as well. It features all discrete circuitry and a very accurate RIAA curve. The gain is variable by a front panal volume control and is capable of up to 47 dB gain. This solves the age old complaint of volume between phono and other input sources. The front panel is brushed aluminum with an instrument grade power toggle switch. A basic RCA cable and mini plug are included in the package.
Features:
Superior audio performance
Front panel power on/off switch
Extemely accurate frequency response
OFC gold plated RCA cables included
Input and output via gold-plated RCA jacks
Sub-sonic filter to reduce deep rumble and wasted amplifier
All-steel case construction with LED power indicator and groud wire connection terminal
High current outboard power supply for low noise and improved audio dynamics
Variable output control for matching the turntable volume level to other connected audio sources
Extra 7dB “Boost” option available for use with very low output cartridges
Specifications:
RIAA Frequency Response: 20-20 kHz, +/- 0.5 dB
Sub Sonic Filter: 7 Hz
Signal-To-Noise Ratio: 80 dBA
Total Harmonic Distortion: 0.06%
Input Impedance: 47 kOhms/220 pF
Output Impedance: 600 Ohms
Gain: 40 dB nominal, plus up to 7 dB gain
BoostSensitivity – normal range: 3.0 mV (with volume control up to 2 o’clock position)
Sensitivity – “Boost” range: 1.5 mV (with volume control past 2 o’clock position/Boost mode)
Overload: 30 mV (20 dB)
Maximum Output: 3.5 Volts
Crosstalk (20-20 kHz): >55 dB
Pro-Ject’s Record Puck is a heavyweight record clamp that is compatible with almost any turntable that doesn’t have a threaded spindle. It weighs approximately 1.7 lb and will help dampen vibration as well as holding your record in place on the platter. The Record Puck is made of metal with a powder coated black finish and felt on the bottom to protect your record.
Will fit these Dual turntables models: CS 431, CS450, CS455, CS505, CS515, CS530, CS616, CS620, CS630, CS2210, CS2215, CS2225, CS2235, CS275361, CS280554, CS286945, CS289030
LEADWIRE: – Oxygen free copper (OFC) for a cleaner sound. All of the terminals are phosphor copper and 24k gold plated for good electrical conductivity and non-allergy reaction. Terminals are hand soldered one by one – Each wire and terminal is color coded for easy cartridge mounting. – Mount on cartridge according to the color of the wire. BLUE = LG (left ground) GREEN = RG (right ground) WHITE = L (left positive) RED = R (right positive)
Turntable and phonograph record player Belt 13.3″
New Highest quality turntable belt, 25.7″ Inside Circumference x 0.200″ Wide x 0.027″ Thick Turntable Belt
New Highest quality turntable belt, 34.0″/86,36 cm Inside Circumference x 0.196″/ 0,49 cm Wide x 0.031″/ 0,078 Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 19.6 Inch / 49.8cm Inside Circumference (total length)
The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation.
The Nagaoka MP-150H MM phonograph cartridge offers superior clarity, detail and dynamic contrast.
Features: Superfine polished special elliptical diamond stylus Powerful samarium cobalt magnet Hardened low-mass, tapered aluminum alloy cantilever for very high fidelity Carbon fibre reinforced plastic Body
Specifications: Type: Moving Magnet Cantilever: Hardened, low-mass tapered aluminum alloy Stylus type: Superfine elliptical bonded diamond with 0.4 x 0.7 mil Cartridge weight: 6.5 g Head shell’s weight: 9.5 g Output voltage @ 1kHz,5cm/sec: 4.5mV Frequency response: 20Hz-20kHz Channel balance @ 1kHz: > 1.5dB Channel separation @ 1kHz: > 24dB Recommended loading: 47k ohms Dynamic compliance: 6.0 x 10-6 cm/dyne Static compliance: 18 x 10-6 cm/dyne Tracking force range: 1.5 – 2.0 g Stylus replacement: Nagaoka JN-P150
The VM750SH Shibata stylus cartridge is a premier 700 Series model in Audio-Technica’s
The AT-XP7/H combo kit includes the AT-XP7 DJ cartridge premounted on the AT-HS6BK headshell.
The M50x are one of our most acclaimed audio solutions and our best-selling headphones. Based on the ATH-M50, the M50x include an upgraded detachable cable for convenience and versatility, perfect for the studio, gaming or when you’re out on the move. Enjoy passive noise isolation through the comfortable ear cups designed to keep you in the zone and in the game, while their large aperture drivers deliver our industry-loved sound signature.
Pro DJ Performance
Hard working DJs require headphones for airtight performances. A quality set of headphones can be the difference between a good show and a great one. Our HF325 packs an incredible amount of sound quality into a compact, noise isolating design that won’t hog all of the space in your gig bag.
All about that bass
Starting with recording studio grade sound quality, the HF325 reveals the critical detail in your mix. The on-ear, noise isolating earcups reduce ambient noise to a minimum, making them ideal for use in loud club environments. The immediate, up-front sound signature is like a microscope for your ears. Vocals are intimate, bass is tight and punchy, and the subtle nuances in tracks are exposed with smooth, rich detail.
Hands and ears on the mix
The rotating earcup makes single-ear monitoring a cinch. No more pinching a stiff set of cans between your shoulder and cheek just to get a peek at the main mix and cue mix. We made it practical to keep your hands on the mix, not the headphones. A big upgrade from bundled and all-purpose headphones, the HF325 provides the features you need to perform at your best.
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
The M-Series ATH-M40x professional monitor headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.
More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Package Content: Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
System Requirements: PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 1,5 grams tracking pressure
0.7 mil Diamond conical tip needle , for 78rpm , 3,0 – 5.0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 2,0 – 3,5 grams tracking pressure
Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 1,75 grams tracking pressure
Commandes expédiées en 24 heures
Diamond .6 mil conical tip needle, 2.5-3.5 grams tracking pressure, 16, 33, 45 not for 78RPM.
$ 32.95
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 2.5 grams tracking pressure
Yellow
MNS, Normarh, Audio Technica, Pfanstiehl
Conical
Générique, non
AT-3600, AT-3600L, AT-91, AT3600, AT3600L, AT3601, AT3650, AT3650C, AT3650L, AT3651, AT91
469-D, 470-D, ATN-91
2,5 – 3,5 grammes
16, 33, 45
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 3,0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5,0 grams tracking pressure
0.4 X 0.7 mil Diamond elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 3,0 grams tracking pressure