ISonic P4875II Motorized Ultrasonic Vinyl Record Cleaner, 2Gal/7.5L, 110V. It comes with mortorized fixtures designed to hold five 12″ or 10″ vinyl records, one 8-OZ bottles of cleaning solution concentrate, one box of lab grade Kimwipe nonfiberous tissue for drying the records. The motor with reducer rotates at 5RPM. 5 records can be cleaned at the same time. Flexible with different combinations of records of different sizes. Fixture can be mounted either on the left or right side of the unit depending on whether the operator is right or left handed. Label protectors with o-ring seals protect the label areas while cleaning. The cleaning solution is a super concentrate. Use 2 cap-fuls for a full tank of water. The ultrasonic cleaner equipped with 3 industrial grade ultrasonic stack transducers which are twice stronger and more durable compared to wafer transducers used by some manufacturers in their commercial models and 3 ceramic heaters. Each transducer is controlled by an individual PCB for best efficiency. This unit has unmatched cleaning power. Full range 30-min. timer with quick set: 10, 15, 20, 25, 30 and 5 minutes, and reducing button for every minute in between. Drainage valve makes it easy to discharge water. Hose is supplied. Heater with 5 settings: 104 to 140 °F or 40 to 60 °C. Thermometer to show approximate actual temperature ranges. Do not use heater for vinyl records. Cooling fan helps for longer operation. Overheat protector prevents the unit being overused which could cause overheating. Quieter than most competitors’ products. Cover holder. This unit is built solidly with very thoughtful designs and high reliability.
WEIGHT: 760 Grams
MATERIAL: STAINLESS STEEL
LOWER DIAMETER: 70 mm
HIGHER DIAMETER: 28 mm
HEIGHT: 20 mm
Pack of 50. Size 17-1/8″ x 14-1/8″
Variable Depth: Scoring at 1/2″, 1″, 1-1/2″ and 2″
Multi-Purpose Mailer to suit Your Shipping Needs
Ideal for 12″ vinyl
Great for Thick LP Box Sets!
The lightweight aluminum AT-HS10BK is a universal ½”-mount headshell for 4-pin turntable cartridges. Featuring an aluminum die-cast body, the AT-HS10 is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of headshell to enable precise placement of the stylus onto the record. The headshell is equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws
Brand New turntable beltThis is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .025 Inch / .6mm Thick .203 Inch / 5.16mm Wide 25.0 Inch / 63.5cm Inside Circumference (total length)
New Highest quality turntable belt, 31.5″ Inside Circumference x 0.158″ Wide x 0.025″ Thick Turntable Belt
NEW Genuine Pro-Ject Essential , Essential II & Essential III Replacement Drive Belt
Also compatible with
– Elemental/Elemental Phono USB
– Primary/Primary Phono USB/Primary E
– Essential/Essential Phono USB
– Essential II/Essential II Phono USB/Essential II Digital
– Essential III/Essential III A
– George Harrison Record Player
– Xtension 9
– Juke Box E
– Juke Box S2
High quality Elliptical cartridge made by Grado
Ion Audio turntable cartridge replacement
– Worn out the phono cartridge for your ION-ITTUSB from converting all that vinyl? Fear not . . . we’ve got
– Headshell not included
– Fits ION-ITTUSB, ION-ITTUSB10,
ION-ITTCD10, ION-LPDOCK, ION-IONICT04, ION-ITT02A, ION-ITT03A, ION-ITT03X
Compatible with all turntables that accept standard headshell-mounted cartridges
– Designed for heavy DJ use
– Excellent sound quality and tracking
Makes Cartridge Set-Up A Breeze, Allowing You To Quickly And Properly Align Your Cartridge
Tool for cartridge alignment and adjustment
Special slip-proof tool for defining the turning centre of Pro-Ject tonearms
Adaptable to accommodate differing tonearm lengths
Also suitable for other manufacturers’ tonearms
Suitable for tonearms between 8″ (203mm) and 12″(305mm) effective length
Provides a lively, vigorous, and dynamic sound.
Reproduces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 8 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
Glow in the dark
N-44-7 CLUB Improved is attached to this cartridge
Made in Japan
The M-Series ATH-M40x professional monitor headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year
The Klipsch T5M Wired Earphones offer superior comfort and unparalleled acoustic quality on-the-go.
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
The M-Series ATH-M30x professional monitor headphones combine modern engineering and high-quality materials to deliver a comfortable listening experience, with enhanced audio clarity and sound isolation. Tuned for highly detailed audio, with strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
Marantz Professional is proud to present the MPM-1000 Studio Series microphone, a high-quality condenser mic that delivers studio-grade audio performance along with unexcelled value. The MPM-1000 Studio Series microphone exemplifies Marantz Professional’s commitment to users who demand no-compromise components that fit within a realistic budget.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 4,0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 2.5 – 4 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 2,0 grams tracking pressure
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 2,0 grams tracking pressure
Orders shipped within 24 hours
EPC-07, EPC-09, EPC-09STAD, EPC-09STLD, EPC07, EPC09, EPC09STAD, EPC09STLD, EPS-27, EPS27
3,0 – 4,0 grams
Audio Technica VMN30EN stylus specified for VM530EN Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 2,0 grams tracking pressure
Audio-Technica ATN3600 stylus specified for AT3600 cartridge, Special conical diamond tip for good fidelity , ,0.6 mil Diamond Conical needle , 3 – 4 grams tracking pressure
Audio Technica VMN20EBstylus specified for VM520EB Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure