MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
WEIGHT: 760 Grams MATERIAL: STAINLESS STEEL LOWER DIAMETER: 70 mm HIGHER DIAMETER: 28 mm HEIGHT: 20 mm
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
New Highest quality turntable belt, 16.9″/40,64 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.030″/ 0,076 Thick Turntable Belt
Turntable and phonograph record player Belt 14″
Brand New turntable beltThis is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .025 Inch / .6mm Thick .203 Inch / 5.16mm Wide 25.0 Inch / 63.5cm Inside Circumference (total length)
NEW Genuine Pro-Ject 2Xperience Replacement Drive Belt
The Nagaoka MP-300 MM phonograph cartridge offers sophistication, refinement and high-definition at all audible frequencies thus making it one of our favorite phonograph cartridges. It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP300 is an advanced technology cartridge that is destined to become a classic out of the box.
Features: Exclusive super rigid body for ultra resonance and superb fidelity Superfine polished special elliptical bonded diamond stylus Powerful samarium cobalt magnet Hardened low-mass, high strength boron cantilever Carbon fibre reinforced plastic body
Specifications: Type: Moving magnet Cantilever: High-strength Boron Stylus type: Superfine elliptical diamond with 0.4 x 0.7 mil Cartridge weight: 8 g Head shell’s weight: 13.5 g Output voltage @ 1kHz,5cm/sec: 3mV Frequency response: 20Hz-25kHz Channel balance @ 1kHz: > 1dB Channel separation @ 1kHz: > 25dB Recommended loading: 47k ohms Dynamic compliance: 7.2 x 10-6 cm/dyne Static compliance: 20 x 10-6 cm/dyne Tracking force range: 1.3 – 1.8 g Stylus replacement: Nagaoka JN-P300
Audio Technica Dual Moving Magnet VM610MONO Cartridge, Aluminum cantilever , 0.6 mil Diamond conical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
Main features Provides a lively, vigorous, and dynamic sound. Reproduces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 8 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Stylus specs Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter Glow in the dark
N-44-7 CLUB Improved is attached to this cartridge Made in Japan
This is a very popular cartridge, found in most modern nostalgic type players. and dating back a decade or so across many brands. Noteably Chou Denshi CZ-800, & soundesign among others. Specs: Tracking Pressure: 2 – 4 grams Element: Ceramic .4 Volts Output
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
The M50x are one of our most acclaimed audio solutions and our best-selling headphones. Based on the ATH-M50, the M50x include an upgraded detachable cable for convenience and versatility, perfect for the studio, gaming or when you’re out on the move. Enjoy passive noise isolation through the comfortable ear cups designed to keep you in the zone and in the game, while their large aperture drivers deliver our industry-loved sound signature.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
Diamond Elliptial tip needle , 16 or 33 or 45rpm NOT for 78rpm, 1.0 – 3.0 grams tracking pressure
0.2 X 0.7 mil Diamond Elliptical tip needle, 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
Manufacturer : SHURE Super Analog Stylus (SAS) Profile Tip The tip of the is carefully chosen from single-crystal natural diamonds. The laser-cut diamond closely resembles that of the cutting stylus used on a cutting lathe to produce the acetate master disks used in vinyl production. This allows the SAS tip to reach into the deepest recesses of the record groove in order to retrieve details which were previously inaccessible to other stylus profiles. Due to its wide contact area with the groove wall, the SAS can reproduce a more expansive bandwidth of information with higher fidelity. Cantilever is one of the most suitable materials for cantilevers. its density is low, Young’s modulus is large, and the speed of sound propagation is approximately 2.6 times faster than that of aluminum. Due to the characteristics above, boron cantilever can more precisely trace the information contained in the record grooves than aluminum cantilever.
0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,75 – 4,0 grams tracking pressure
Orders shipped within 24 hours
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 grams tracking pressure
$ 49.99
Orange
Normarh, Dual
Elliptical
no
DN-211, DN-241, DN-242, DN211, DN241, DN242, TK221, TK223, TK230, TK231, TK235, TK237, TK251, TK256, TK403CD4, TKS236
293-DE, 4206-DET
1,5 grams
Replacement JNP150 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip
Audio-Technica ATN-91R stylus specified forAT91R and CN5625AL cartridges, Special conical diamond tip for good fidelity ,06 Diamond conical Replacement Stylus with Bonded Round Shank , 2 – 4 grams tracking pressure
Audio-Technica ATN-XP5 stylus specified for AT-XP5 cartridges, Special elliptical diamond tip for good fidelity ,0.3 x 0.7 Diamond Elliptical Replacement Stylus with Bonded Round Shank , 2 – 4 grams tracking pressure
Audio Technica VMN30EN stylus specified for VM530EN Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure