You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
The AT617a cartridge stylus cleaner is a specially formulated polyurethane gel that gently removes dirt particles from the stylus tip when the stylus is lowered onto it. The gel’s surface is washable and will remain tacky for years.
Material: Polyurethane gel
Dimensions: 37.5 mm (1.48″) diameter × 17 mm (0.67″)
This is a Philmore Phono Pre-Amplifier model PHIPRE600. This stereo/phono pre-amplifier will allow you to replace a crystal or ceramic stereo cartridge with a better quality magnetic stereo cartridge while using the original stereo amplifier supplied with your turntable. The use of this pre-amplifier in conjunction with a magnetic cartridge will give you CD quality sound out of your vintage turntable. This pre-amplifier will allow you to take phono signals to line-level. Use this to amplify and interface with mixers, main or monitor systems, audio workstations or sound cards. Uses standard RCA-RCA dual phono cables (not included) with easy in/out plug-ins and works with all magnetic cartridges. This pre-amplifier allows the use of turntables on newer equipment not having a discrete “Phono” input. With this device you can plug into newer equipment using their AUX, DVD, TAPE or CD line level inputs. Features: Convert Phono signal to line level Works with turntables using a magnetic cartridge Good for transferring your old LPs to digital media storage Frequency response: 30-20K Impedance: 50K Ohms Gain: 50X (in+5V out) Max Output: 1.8V Max input: 30mV S/N Ratio: Over 60dB Power requirements 117VAC, 50/60 Hz, 0.1 Watt
New high quality super elasticity rubber drive belt
21′ long x 0.20′ width x 0.02′ thick ( 544mm long x 5mm width x 0.5mm thick)
Application: Fits most all 10′ to 13′ diameter platter turntables
Can replace all 21′ to 24.5′ belts (170 to 200mm BELT), Perfect replacement or belt, specs equal or exceed original standards.
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. Size : 23.6″ by 0.200″ wide
New Highest quality turntable belt, 24.5″/62,23 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
New Highest quality turntable belt, 25.7″ Inside Circumference x 0.200″ Wide x 0.027″ Thick Turntable Belt
The Stanton 750 professional cartridge is designed to exceed the demands of the professional DJ and deliver a wide dynamic range of audio for the vinyl record enthusiast. A professional grade cartridge for digital mixing, scratch performance and vinyl recordings, the Stanton 750 delivers consistent sonic purity for all applications.
High quality Elliptical cartridge made by Grado
The AT-VM95ML/H combo kit includes the AT-VM95ML dual moving magnet cartridge premounted on the AT-HS6BK headshell.
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
Pro DJ Performance
Hard working DJs require headphones for airtight performances. A quality set of headphones can be the difference between a good show and a great one. Our HF325 packs an incredible amount of sound quality into a compact, noise isolating design that won’t hog all of the space in your gig bag.
All about that bass
Starting with recording studio grade sound quality, the HF325 reveals the critical detail in your mix. The on-ear, noise isolating earcups reduce ambient noise to a minimum, making them ideal for use in loud club environments. The immediate, up-front sound signature is like a microscope for your ears. Vocals are intimate, bass is tight and punchy, and the subtle nuances in tracks are exposed with smooth, rich detail.
Hands and ears on the mix
The rotating earcup makes single-ear monitoring a cinch. No more pinching a stiff set of cans between your shoulder and cheek just to get a peek at the main mix and cue mix. We made it practical to keep your hands on the mix, not the headphones. A big upgrade from bundled and all-purpose headphones, the HF325 provides the features you need to perform at your best.
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
Diamond .6 mil conical tip needle, 2.5-3.5 grams tracking pressure, 16, 33, 45 not for 78RPM.
0.4 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 3,0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5,0 grams tracking pressure
Orders shipped within 24 hours
High quality Elliptical needle made by Tonar
16, 33, 45
There are no reviews yet.
Your email address will not be published. Required fields are marked *
Your review *
Replacement JNP500 stylus with spherical tip and aluminium alloy cantilever. Cantilever: Boron
Stylus: Line contact naked block diamond stylus tip
Audio-Technica ATN-91R stylus specified forAT91R and CN5625AL cartridges, Special conical diamond tip for good fidelity ,06 Diamond conical Replacement Stylus with Bonded Round Shank , 2 – 4 grams tracking pressure
Audio-Technica ATN-XP5 stylus specified for AT-XP5 cartridges, Special elliptical diamond tip for good fidelity ,0.3 x 0.7 Diamond Elliptical Replacement Stylus with Bonded Round Shank , 2 – 4 grams tracking pressure
Audio-Technica ATN85EP stylus specified for AT85EP cartridges, Special elliptical diamond tip for good fidelity ,0.3 x 0.7 mil elliptical Conical needle , 1 – 1.5 grams tracking pressure