MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
Vinyl Record Divider-White.
Bearing lubricant
How to use Grease it
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Grease it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some grease off your turntable to keep it looking clean.
Please only use Grease it for turntables with inverted bearings, like RPM Line, Xtension models and Signature Line. For non-inverted bearings you should use Lube it.
New Highest quality turntable belt, 18.7″/47,49 cm Inside Circumference x 0.120″/ 0,30 cm Wide x 0.032″/ 0,081 Thick Turntable Belt
New Highest quality turntable belt, 14.4″/36,57 cm Inside Circumference x 0.197″/ 0,50 cm Wide x 0.025″/ 0,063 Thick Turntable Belt
New Highest quality turntable belt, 24.5″/62,23 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 20.0 Inch / 50.8cm Inside Circumference (total length
The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.
The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.
The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.
This is a very popular cartridge, found in most modern nostalgic type players. and dating back a decade or so across many brands. Noteably Chou Denshi CZ-800, & soundesign among others. Specs: Tracking Pressure: 2 – 4 grams Element: Ceramic .4 Volts Output
Main features Produces a well balanced and solid sound. Generates a broad, smooth sound with a musical audio response and 3D audio image, similar to the specification of the genuine Shure M44G cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 6 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Stylus specs Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
Replacement needles N44G Improved is attached to this cartridge Made in Japan
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
The M50x are one of our most acclaimed audio solutions and our best-selling headphones. Based on the ATH-M50, the M50x include an upgraded detachable cable for convenience and versatility, perfect for the studio, gaming or when you’re out on the move. Enjoy passive noise isolation through the comfortable ear cups designed to keep you in the zone and in the game, while their large aperture drivers deliver our industry-loved sound signature.
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Package Content: Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
System Requirements: PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 2.5 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 1,5 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 2,0 grams tracking pressure
Orders shipped within 24 hours
0.6 mil Diamond Conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,25 grams tracking pressure
$ 44.95
Clear
Normarh, Pfansthiel
Conical
no
185XLT, 190LT, AN-P50 C, ANP50C, S-111, S111, YMP50C
716-D
Audio-Technica AT-VMN95EN stylus specified for AT-VM95EN cartridge, Special elliptical diamond tip for good fidelity , 0.3 x 0.7 mil Diamond elliptical needle , 1.8 – 2.2 grams tracking pressure
Replacement JNP110 stylus with spherical tip and aluminium alloy cantilever.Stylus: 0.4 x 0.7 Mil bonded elliptical diamond stylus tip
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5,0 grams tracking pressure
Universal Replacement Stylus For 750 Stanton Cartridges