MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
The new PS2 MM phono preamp sounds very good and looks classy as well. It features all discrete circuitry and a very accurate RIAA curve. The gain is variable by a front panal volume control and is capable of up to 47 dB gain. This solves the age old complaint of volume between phono and other input sources. The front panel is brushed aluminum with an instrument grade power toggle switch. A basic RCA cable and mini plug are included in the package.
Features:
Superior audio performance
Front panel power on/off switch
Extemely accurate frequency response
OFC gold plated RCA cables included
Input and output via gold-plated RCA jacks
Sub-sonic filter to reduce deep rumble and wasted amplifier
All-steel case construction with LED power indicator and groud wire connection terminal
High current outboard power supply for low noise and improved audio dynamics
Variable output control for matching the turntable volume level to other connected audio sources
Extra 7dB “Boost” option available for use with very low output cartridges
Specifications:
RIAA Frequency Response: 20-20 kHz, +/- 0.5 dB
Sub Sonic Filter: 7 Hz
Signal-To-Noise Ratio: 80 dBA
Total Harmonic Distortion: 0.06%
Input Impedance: 47 kOhms/220 pF
Output Impedance: 600 Ohms
Gain: 40 dB nominal, plus up to 7 dB gain
BoostSensitivity – normal range: 3.0 mV (with volume control up to 2 o’clock position)
Sensitivity – “Boost” range: 1.5 mV (with volume control past 2 o’clock position/Boost mode)
Overload: 30 mV (20 dB)
Maximum Output: 3.5 Volts
Crosstalk (20-20 kHz): >55 dB
You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
Crosley’s Deluxe Record Cleaning Kit
Turntable and phonograph record player Belt 13.3″
New Highest quality turntable belt, 31.5″ Inside Circumference x 0.158″ Wide x 0.025″ Thick Turntable Belt
New Highest quality turntable belt, 25.7″ Inside Circumference x 0.200″ Wide x 0.027″ Thick Turntable Belt
NEW Genuine Pro-Ject Essential , Essential II & Essential III Replacement Drive Belt Also compatible with – Elemental/Elemental Phono USB – Primary/Primary Phono USB/Primary E – Essential/Essential Phono USB – Essential II/Essential II Phono USB/Essential II Digital – Essential III/Essential III A – George Harrison Record Player – VT-E – Xtension 9 – Juke Box E – Juke Box S2
Audio Technica Dual Moving Magnet VM520EB Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
The 1022GX cartridge is recommended for the discerning listener as it uses a vital-shank, nude, diamond stylus. This polyhedral, line-contact diamond profile was chosen because it has a very low tip-mass and a large contact area whilst being very narrow from front to back, even enabling the undistorted retrieval of ultrasonic frequencies in a recording. A large contact area means that stylus and record wear are reduced and because it plays lower down in the groove than spherical types, older records may well gain a new lease of life.
Audio Technica VM Series dual magnet cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
VERTIGAIN TECHNOLOGY®
VERTIGAIN technology® allows recording in unparalleled broadcast quality, with up to 10% more clarity & accuracy than other USB microphones.
2 Recording Patterns
Cardioid and Omni-directional. For different application you can choose one of them. Cardioid mode mostly use for Vocal recording , omnidirectional mode for video conference or for meeting applications.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
0.2 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 3,0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 grams tracking pressure
Replaces Supex SMM Series needles:
Supex SMM/25E, SMM/38E SM-38 SM-38E, SMM/5 SMM-5, SMR25R, SMM/250SP
Diamond 0.3 x 0.7 mil bonded conical tip needle, 16 or 33 or 45rpm NOT for 78rpm , 1 – 2.5 grams tracking pressure.
Orders shipped within 24 hours
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 2.5 – 4 grams tracking pressure
$ 32.95
Red
Normarh, Audio Technica, Pfanstiehl
Conical
no
2.5-4 Grams
270-D
• AUDIO TECHNICA NEEDLES ATS-10 ATS10 ATS-10L ATS10L ATS-12C ATS12C, ASTATIC NEEDLES N482 N478 N481 N483, AT2500 AT-33 AT33 AT-330 AT330 AT-60 AT60 AT-68XC AT68XC AT-7110 AT7110 AT-910 AT910 AT-910B AT910B AT-960X AT960X CE12010 CS110II DJ714 N-10-100 N10100 TP111E X-11 X11, AUDIO TECHNICA CARTRIDGES VM8-7D VM87D AT-10 AT10 AT-10PQ AT10PQ AT-1110 AT1110 AT-2000 AT2000 AT-201 AT201 AT-2500, EVG NEEDLES PM2277DE PM2276D, MARANTZ NEEDLES 6370Q
Audio Technica VMN10CBstylus specified for VM620MONO Cartridge, Aluminum cantilever , 0.6 mil Diamond conical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
Audio-Technica AT-VMN95C stylus specified for AT-VM95C cartridge, Special conical diamond tip for good fidelity , 0.6 mil Diamond Conical needle , 1.8 – 2.2 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm
Audio Technica VMN30EN stylus specified for VM530EN Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure