MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
ISonic P4875II Motorized Ultrasonic Vinyl Record Cleaner, 2Gal/7.5L, 110V. It comes with mortorized fixtures designed to hold five 12″ or 10″ vinyl records, one 8-OZ bottles of cleaning solution concentrate, one box of lab grade Kimwipe nonfiberous tissue for drying the records. The motor with reducer rotates at 5RPM. 5 records can be cleaned at the same time. Flexible with different combinations of records of different sizes. Fixture can be mounted either on the left or right side of the unit depending on whether the operator is right or left handed. Label protectors with o-ring seals protect the label areas while cleaning. The cleaning solution is a super concentrate. Use 2 cap-fuls for a full tank of water. The ultrasonic cleaner equipped with 3 industrial grade ultrasonic stack transducers which are twice stronger and more durable compared to wafer transducers used by some manufacturers in their commercial models and 3 ceramic heaters. Each transducer is controlled by an individual PCB for best efficiency. This unit has unmatched cleaning power. Full range 30-min. timer with quick set: 10, 15, 20, 25, 30 and 5 minutes, and reducing button for every minute in between. Drainage valve makes it easy to discharge water. Hose is supplied. Heater with 5 settings: 104 to 140 °F or 40 to 60 °C. Thermometer to show approximate actual temperature ranges. Do not use heater for vinyl records. Cooling fan helps for longer operation. Overheat protector prevents the unit being overused which could cause overheating. Quieter than most competitors’ products. Cover holder. This unit is built solidly with very thoughtful designs and high reliability.
You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
NEW Genuine Pro-Ject 2Xperience Replacement Drive Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 19.6 Inch / 49.8cm Inside Circumference (total length)
New Highest quality turntable belt, 25.7″ Inside Circumference x 0.200″ Wide x 0.027″ Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .046 Inch / 1.2mm Thick and Wide 15.2 Inch / 38.1cm Inside Circumference (total length)
High quality Elliptical cartridge made by Grado
The VM740ML Micro line stylus cartridge is a premier 700 Series VM740ML in Audio-Technica’s New VM cartridge line – a line that harks back to A-T’s Early days as a manufacturer primarily of high-end phono cartridges while also incorporating today’s advanced technology Like all VM cartridges the VM740ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response The cartridge’s Micro line stylus allows it to Trace the record groove with incredible accuracy resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match The stylus’s multilevel shape also wears better than other styli while reducing the wear on your records Includes mounting hardware
Audio Technica Dual Moving Magnet VM610MONO Cartridge, Aluminum cantilever , 0.6 mil Diamond conical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
The M-Series ATH-M40x professional monitor headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.
More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
VERTIGAIN TECHNOLOGY®
VERTIGAIN technology® allows recording in unparalleled broadcast quality, with up to 10% more clarity & accuracy than other USB microphones.
2 Recording Patterns
Cardioid and Omni-directional. For different application you can choose one of them. Cardioid mode mostly use for Vocal recording , omnidirectional mode for video conference or for meeting applications.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 1,5 – 2,5 grams tracking pressure
Manufacturer : SHURE Super Analog Stylus (SAS) Profile Tip The tip of the is carefully chosen from single-crystal natural diamonds. The laser-cut diamond closely resembles that of the cutting stylus used on a cutting lathe to produce the acetate master disks used in vinyl production. This allows the SAS tip to reach into the deepest recesses of the record groove in order to retrieve details which were previously inaccessible to other stylus profiles. Due to its wide contact area with the groove wall, the SAS can reproduce a more expansive bandwidth of information with higher fidelity. Cantilever is one of the most suitable materials for cantilevers. its density is low, Young’s modulus is large, and the speed of sound propagation is approximately 2.6 times faster than that of aluminum. Due to the characteristics above, boron cantilever can more precisely trace the information contained in the record grooves than aluminum cantilever.
High quality Elliptical needle made by Tonar
0.4 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
Orders shipped within 24 hours
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 2,0 – 3,0 grams tracking pressure
$ 32.95
Blue
Normarh, Akai, Fisher, Kenwood, Sansui, Sony
Conical
no
DSN-69, DSN69, N-292, N292, RS-3, RS5, SC-60, SC-70, SC-80, SC60, SC70, SC80, SN-60, SN-70, SN-80, SN60, SN70, SN80, ST-140, STY140, V-61, V-66, V-72, V61, V66
16, 33, 45
435-D, 732-D7
2,0 – 3,0 grams
Replacement JNP500 stylus with spherical tip and aluminium alloy cantilever. Cantilever: Boron Stylus: Line contact naked block diamond stylus tip
Audio Technica VMN30EN stylus specified for VM530EN Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
Audio-Technica ATN-91R stylus specified forAT91R and CN5625AL cartridges, Special conical diamond tip for good fidelity ,06 Diamond conical Replacement Stylus with Bonded Round Shank , 2 – 4 grams tracking pressure
Audio-Technica AT-VMN95C stylus specified for AT-VM95C cartridge, Special conical diamond tip for good fidelity , 0.6 mil Diamond Conical needle , 1.8 – 2.2 grams tracking pressure