MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
Turntable Cartridge 4 Piece Connector High-End Lead Wires Set with Gold connector. not twisted. Pack in PP box with foam inlay Mount on cartridge according to the color of shrink tubing: BLUE = LG (left ground) GREEN = RG (right ground) WHITE = L (left positive) RED = R (right positive) Specifications of High-End Lead Wires Sets Cable -Conductor: 7N Copper (OFC), 7-strands, Dia. 0.16mm, silver -Insulation Thickness: 0.41mm -Overall Dia.: 1.32mm -Conductor Resistance at 120 degree centigrade: 42.60Ohm/Kft Connector plug -7N Copper (OFC), GOLD connectors, Transparent Cable
This new brush is made of hundreds of thousands of carbon fibers.It works two ways on the record. Eliminating the static electricity of the record and it takes the dust out of the record grooves.
The AT-LH18H is a 18-gram universal ½”-mount headshell, optimized to accommodate 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws, plastic washers, and a hexagonal wrench.
The cartridge is also available in 13-gram (AT-LH13H) and 15-gram (AT-LH15H) models for optimal compatibility with your cartridge/tonearm requirements.
Microdust and contaminants can cause wear and tear on your records and stylus—they diminish sound quality, too. Audio-Technica’s AT6012 Record Care Kit is designed to gently remove contaminates while improving record fidelity and tracking. AT6012 Record Care Kit contains: Audio-Technica Record Care Solution (2 FL. OZ); Sonic Broom brush pad; storage base; double-sided adhesive tape.
New high quality super elasticity rubber drive belt 24″ long x 0.20″ width x 0.02″ thick ( 610mm long x 5mm width x 0.5mm thick) Can replace all 24″ to 27″ belts, Perfect replacement or belt, specs equal or exceed original standards.
New Highest quality turntable belt, 31.5″ Inside Circumference x 0.158″ Wide x 0.025″ Thick Turntable Belt
Turntable and phonograph record player Belt 14″
The VM750SH Shibata stylus cartridge is a premier 700 Series model in Audio-Technica’s
Main features Provides a lively, vigorous, and dynamic sound. Reproduces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 8 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Stylus specs Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
N-44-7 DJ Improved is attached to this cartridge
Made in Japan
The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.
The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings
Pro-Ject’s Record Puck is a heavyweight record clamp that is compatible with almost any turntable that doesn’t have a threaded spindle. It weighs approximately 1.7 lb and will help dampen vibration as well as holding your record in place on the platter. The Record Puck is made of metal with a powder coated black finish and felt on the bottom to protect your record.
The ATH-WS990BT wireless over-ear headphones combine exclusive 53 mm Deep Motion Drivers with large, high-flux magnetic circuitry and Bluetooth technology to deliver vibrant full-range wireless audio with invigorating bass. The powerful magnetic force of the circuitry results in dynamic, well-tailored diaphragm response to reproduce deep, clear low frequencies and detailed mid-to-high frequencies.
Pro DJ Performance
Hard working DJs require headphones for airtight performances. A quality set of headphones can be the difference between a good show and a great one. Our HF325 packs an incredible amount of sound quality into a compact, noise isolating design that won’t hog all of the space in your gig bag.
All about that bass
Starting with recording studio grade sound quality, the HF325 reveals the critical detail in your mix. The on-ear, noise isolating earcups reduce ambient noise to a minimum, making them ideal for use in loud club environments. The immediate, up-front sound signature is like a microscope for your ears. Vocals are intimate, bass is tight and punchy, and the subtle nuances in tracks are exposed with smooth, rich detail.
Hands and ears on the mix
The rotating earcup makes single-ear monitoring a cinch. No more pinching a stiff set of cans between your shoulder and cheek just to get a peek at the main mix and cue mix. We made it practical to keep your hands on the mix, not the headphones. A big upgrade from bundled and all-purpose headphones, the HF325 provides the features you need to perform at your best.
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 1,0 – 3,0 grams tracking pressure
0.3 mil Diamond conical tip needle , Only or 78rpm , 4,5 – 5,5 grams tracking pressure
Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 0,75-1,5 grams tracking pressure
0.3 mil Diamond tip needle , ONLY for 78rpm
Orders shipped within 24 hours
0.7 mil Diamond Conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 3,0 grams tracking pressure
$ 32.95
Tan
Normarh, Pfansthiel, Aiwa, Excel, Sanyo
Conical
no
MG-47, MG47, MG47D, PC-65, PC65, PN-K 65, PNK-75, PNK65, PNK75, S-75-CR, S758CR, ST-37, ST37
473-D, 746-D7
1,0 – 3,0 grams
Replacement JNP200 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip
Universal Replacement Stylus For 750 Stanton Cartridges
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 1,5 grams tracking pressure
Audio Technica VMN20EBstylus specified for VM520EB Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure