You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
Will fit these Dual turntables models: CS 431, CS450, CS455, CS505, CS515, CS530, CS616, CS620, CS630, CS2210, CS2215, CS2225, CS2235, CS275361, CS280554, CS286945, CS289030
– Oxygen free copper (OFC) for a cleaner sound. All of the terminals are phosphor copper and 24k gold plated for good electrical conductivity and non-allergy reaction. Terminals are hand soldered one by one
– Each wire and terminal is color coded for easy cartridge mounting.
– Mount on cartridge according to the color of the wire.
BLUE = LG (left ground)
GREEN = RG (right ground)
WHITE = L (left positive)
RED = R (right positive)
The Vinyl Record Cleaner kit comes with Black Velvet stylus & Record cleaner and the Cleaning Fluid 2oz.
New Highest quality turntable belt, 27.3″/69,34 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.024″/ 0,060 Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. Size : 23.6″ by 0.200″ wide
New Highest quality turntable belt, 14.4″/36,57 cm Inside Circumference x 0.197″/ 0,50 cm Wide x 0.025″/ 0,063 Thick Turntable Belt
This .3 x .7 elliptical cartridge fits both Half-inch and P-Mount turntables. It features precision engineering and many other features found in the more expensive Audio-Technica cartridges.
1/2″ Mount Cartridge, with 901-D7 Conical Stylus
Phonograph stereo cartridge with stylus, needle guard and mounting bracket, Pfanstiehl P-132D, EV 5208D, 5208, 5126, 5126D. Replaces: Varco TN4A, TN4B, TN4BD, TN-4A, TN-4B, TN-4BD, EV 5126, EV 5126D, EV 5208, EV 5208D Astatic 17, Astatic 17D, Astatic 155, Pfanstiehl P-226, Pfanstiehl P-226D. Uses 864 needle. Ceramic, 0.5 volts output. This is a great universal replacement cartridge for requirements of 0.5 volts output. Will support 33, 45 and 78 RPM. Brand new. Commonly used to replace cartridges in: Rockola 404, Rockola 408, Rockola 414, Rockola 418, Rockola 430, Rockola 431, Rockola 434, Rockola 435, Rockola 441, Rockola 443, Rockola 445, Rockola 1468, Rockola 1475, Rockola 1478, Rockola 1485, Rockola 1488, Rockola 1493, Rockola 1496, Rockola 1497 jukeboxes. Will also replace cartridges in many Wurlitzer and AMI Rowe jukeboxes.
Produces a well balanced and solid sound.
Generates a broad, smooth sound with a musical audio response and 3D audio image, similar to the specification of the genuine Shure M44G cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 6 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
Glow in the dark
N44G DJ Improved is attached to this cartridge
Made in Japan
The ATH-WS990BT wireless over-ear headphones combine exclusive 53 mm Deep Motion Drivers with large, high-flux magnetic circuitry and Bluetooth technology to deliver vibrant full-range wireless audio with invigorating bass. The powerful magnetic force of the circuitry results in dynamic, well-tailored diaphragm response to reproduce deep, clear low frequencies and detailed mid-to-high frequencies.
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
VERTIGAIN technology® allows recording in unparalleled broadcast quality, with up to 10% more clarity & accuracy than other USB microphones.
2 Recording Patterns
Cardioid and Omni-directional. For different application you can choose one of them. Cardioid mode mostly use for Vocal recording , omnidirectional mode for video conference or for meeting applications.
Marantz Professional is proud to present the MPM-1000 Studio Series microphone, a high-quality condenser mic that delivers studio-grade audio performance along with unexcelled value. The MPM-1000 Studio Series microphone exemplifies Marantz Professional’s commitment to users who demand no-compromise components that fit within a realistic budget.
0.7 mil Diamond conical tip needle , for 16,33 & 45 RPM , 3,0 – 5.0 grams tracking pressure
.2 x .7 Mil Elliptical Diamond replacement stylus, 33 & 45 RPM, 1-2 Grams tracking force.
Diamond 0.7 mil bonded conical tip needle. 1.5 – 2.5 grams tracking pressure. 16 or 33 or 45rpm NOT for 78rpm
The Nagaoka NMP-2.0 Stylus is a compromise tip used for Mono and badly worn LPs (16/33/45)
Tracking force: 1.5-3 grams
Nagaoka 2.0 mil Mono stylus is for the entire Nagaoka MP series
Orders shipped within 24 hours
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 0,75 – 1,5 grams tracking pressure
M44-7X, M447X, M44C, N-44 C, N-44 E, N-44-3, N-44-5, N-44-7, N-44-G, N443, N445, N447, N44C, N44E, N44G
16, 33, 45
0,75 – 1,5 grams
Replacement JNP110 stylus with spherical tip and aluminium alloy cantilever.Stylus: 0.4 x 0.7 Mil bonded elliptical diamond stylus tip
Audio-Technica ATN3600 stylus specified for AT3600 cartridge, Special conical diamond tip for good fidelity , ,0.6 mil Diamond Conical needle , 3 – 4 grams tracking pressure
Audio Technica VMN20EBstylus specified for VM520EB Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
Replacement JNP150 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip