MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
This universal 1/2″-mount headshell for 4-pin turntable cartridges features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with color-coded headshell lead wires and cartridge mounting hardware. The AT-HS1 Universal Headshell fits both the AT-LP120-USB, AT-LP240-USB and AT-LP1240-USB Direct-Drive Professional Turntables.
The Tonar Tacky Cleaner takes an unconventional approach to cleaning records. By having a sticky silicone elastomer surface that deforms when rolling, it can fit in the record grooves and the dust and grime within stick to the tacky cleaner. After use, the rolling cleaner can be cleaned under a tap with water and a little soap, once dry it will be a sticky as new.
Turntable Cartridge 4 Piece Connector High-End Lead Wires Set with Gold connector. twisted. Pack in PP box with foam inlay Mount on cartridge according to the color of shrink tubing: BLUE = LG (left ground) GREEN = RG (right ground) WHITE = L (left positive) RED = R (right positive) Specifications of High-End Lead Wires Sets Cable -Conductor: 7N Copper (OFC), 7-strands, Dia. 0.16mm, silver -Insulation Thickness: 0.41mm -Overall Dia.: 1.32mm -Conductor Resistance at 120 degree centigrade: 42.60Ohm/Kft Connector plug -7N Copper (OFC), AS-06 SILVER connectors, White Cable
New Highest quality turntable belt, 24.5″/62,23 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
Turntable and phonograph record player Belt 14″
Turntable and phonograph record player Belt 13.3″
New Highest quality turntable belt, 17.2″/43,68 cm Inside Circumference x 0.157″/ 0,40 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Tetrad Factory part numbers would include ranges from A0 thru A4 B0 thru B4 C0 thru C4 Phonograph cartridge Pfanstiehl P-410D, with M853-DS77 stylus and needle guard, universal Tetrad replacement for all Tetrad Cartridges having blue connector socket, and needle stamped with any of the following: 50, 51, 52, 53, 54, 60, 61, 62, 63, 64, A0-A4; B0-B4; C0-C4; T5HD most popular stamp on needle handle is T5HD most popular stamp on cartridge socket is TC8HO or TC8H0. Comes with Arm braquet
Main features Produces a well balanced and solid sound. Generates a broad, smooth sound with a musical audio response and 3D audio image, similar to the specification of the genuine Shure M44G cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 6 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Stylus specs Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
Replacement needles N44G DJ Improved is attached to this cartridge Made in Japan
Main features Provides a lively, vigorous, and dynamic sound. Reproduces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 8 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
N-44-7 DJ Improved is attached to this cartridge
Made in Japan
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
The ATH-WS990BT wireless over-ear headphones combine exclusive 53 mm Deep Motion Drivers with large, high-flux magnetic circuitry and Bluetooth technology to deliver vibrant full-range wireless audio with invigorating bass. The powerful magnetic force of the circuitry results in dynamic, well-tailored diaphragm response to reproduce deep, clear low frequencies and detailed mid-to-high frequencies.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 1,75 grams tracking pressure
0.7 mil Diamond Conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 2,0 grams tracking pressure
Cantilever Series Limited quantity Manufacturer : SHURE
For V15 type IV
100% custom designed by one of the reticent craftsmen, Kotaro Morita. 2nd series of black wooden cantilever, USHIKOROSHI, also known as Christmas berry wood.
**Please be very cautious upon handling this product as it is extremely fragile compared to Aluminum, which is generally used for cantilever**
0,3 mil Diamond conical tip needle ,ONLY for 78rpm , 1.0 – 3,0 grams tracking pressure
Orders shipped within 24 hours
Tip:Elliptical Stylus
Cartridge Number: M97ED, M97EJ
$ 142.95
4 in stock
Jico
Yes
16, 33, 45
Elliptical
N97ED – E007433
Universal Replacement Stylus For 750 Stanton Cartridges
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 1,0 – 3,0 grams tracking pressure
Audio-Technica AT-VMN95E stylus specified for AT-VM95E cartridge, Special elliptical diamond tip for good fidelity , 0.3 x 0.7 mil Diamond Elliptical needle , 1.8 – 2.2 grams tracking pressure
Audio Technica VMN20EBstylus specified for VM520EB Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure