MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
Tape Deck, Reel to Reel manual Head Demagnetizer The DEM1 head demagnetizer is easy to use and has the required magnetic field to properly demagnetize the magnetic heads and guides of almost all REEL TO REEL, TAPE DECK, VHS DECK and all other similar machines. It’s easy to use: plug into an 110 Volt AC socket, place the tip close to the recording head and use a slight rotary motion to cover the entire surface area of the head. Your machine will be demagnetized and will return to full and complete use. The DEM1 use a standard 110V AC. Please take a look at the picture below. Comes in sealed blister packaging. “CE” conform.
Replacement four conductor ( Stereo). Tone Arm Wires. Use to replace leads to mono or stereo ceramic cartridges or stereo magnetic types. Solder clips will fit either type or may be cut off for SME style arm. Color Coded, 11.7 inches in length.
New Highest quality turntable belt, 16.9″/40,64 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.030″/ 0,076 Thick Turntable Belt
New high quality super elasticity rubber drive belt 24″ long x 0.20″ width x 0.02″ thick ( 610mm long x 5mm width x 0.5mm thick) Can replace all 24″ to 27″ belts, Perfect replacement or belt, specs equal or exceed original standards.
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. Size : 23.6″ by 0.200″ wide
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .025 Inch / .6mm Thick .203 Inch / 5.16mm Wide 20.7 Inch / 52.6cm Inside Circumference (total length)
The Nagaoka MP-500H MM phonograph cartridge offers the highest musical and creative expression of the new MP series. It expertly extracts and reproduces with vivid, colorful and dimensional clarity what others miss. Meet our little friend – the Nagaoka MP-500 phonograph cartridge – the master of the grooves.
Features: Exclusive super rigid body for ultra resonance and superb fidelity Superfine line contact diamond stylus Powerful samarium cobalt magnet Low-mass, high strength boron cantilever Carbon fibre reinforced plastic body
Specifications: Type: Moving magnet Cantilever: High-strength Boron Stylus type: Superfine line contact diamond Cartridge weight: 8.0 g Head shell’s weight: 13.5 g Output voltage @ 1kHz,5cm/sec: 3mV Frequency response: 20Hz-25kHz Channel balance @ 1kHz: > 1dB Channel separation @ 1kHz: > 27dB Recommended loading: 47k ohms Dynamic compliance: 8.5 x 10-6 cm/dyne Tracking force range: 1.3 – 1.8 g Stylus replacement: Nagaoka JN-P500
Audio Technica VM Series dual magnet cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
The Nagaoka MP-100 phonograph cartridge offers musical clarity and expression beyond its price and competitors splendid upward start toward long term musical enjoyment. Half-inch system with conical diamond on lightweight aluminum cantilver. The Nagaoka MP-100 phone cartridge offers musical clarity and expression beyond its price and competitors – a plendid upwards start toward long term musical enjoyment Features -Superfine polished conical diamond bonded stylus -Powerfull samarium cobalt magnet -Lightweight aluminum alloy cantilever -Carbon fibre reinforced plastic shoe -Anti ferro magnetic permalloy shield casing Stylus replacement: Nagaoka JN-P100 The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
The M-Series ATH-M30x professional monitor headphones combine modern engineering and high-quality materials to deliver a comfortable listening experience, with enhanced audio clarity and sound isolation. Tuned for highly detailed audio, with strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Package Content: Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
System Requirements: PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
0.3 mil Diamond conical tip needle , ONLY for 78rpm , 8 grams tracking pressure
0.7 mil Diamond Conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3-4 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5.0 grams tracking pressure
Diamond 0.6 mil conical tip needle, 1.0 – 1.5 grams tracking pressure. (1.25 nominal), 16, 33 or 45rpm, NOT for 78RPM.
Orders shipped within 24 hours
$ 24.95
Needle/Stylus Specifications: .7 Mil Diamond Tip, for 16, 33, & 45 RPM
Color may vary.
Gray, Yellow
Generic
Conical
no
16, 33, 45
TC-222
Audio-Technica ATN3600L stylus specified for AT3600 cartridges, Special conical diamond tip for good fidelity ,0.6 mil Diamond Conical needle , 3 – 4 grams tracking pressure
Replacement JNP200 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip
Replacement JNP110 stylus with spherical tip and aluminium alloy cantilever.Stylus: 0.4 x 0.7 Mil bonded elliptical diamond stylus tip
Replacement JNP150 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip