MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
The Measure it Stylus Tracking Force Gauge is a highly accurate electronic balance that is designed for measuring stylus trackingforces up to 5.0 grams in 0.001 gram increments. Each Measure it S2 can easily be calibrated with the included calibration weight. The Measure it S2 has a solid aluminum housing with a 4-digit LCD backlit display. Whenever in doubt about the actual amount of pressure on the diamond tip the 4 digit display of this smart tool will help. Armed with precise information about tracking force, your stylus tip wear can be significantly reduced.
Connects to Turntable Output to ing Phono Level Up to Line Level12V DC Adaptor Included Load Impedance: 10K Ohms Reference Voltage: 1V Input Sensitivity / Impedance/PHONO 3 mV / 50K Ohms T.H.D. : 0.08 for 1 KHz 3 mV Input Output Level;2V S/N Ratio (with A-WTD);70 dB Frequency Response:20 Hz ~ 20 KHz ±2dB Dimensions (WHD):3.54″x2.13″ x1.02″ Weight : 0.88 Lbs Features Connects to Turntable Output to Bring Phono Level Up to Line Level – 12V DC 110V Adaptor Included Load Impedance: 10K Ohms – Reference Voltage: 1V d Input Sensitivity/Impedance/PHONO 3 mV / 50K Ohms – T.H.D: 0.08 for 1 KHz 3 mV Input – Output Level: 2V S/N Ratio (A-WTD): 70 dB – Frequency Response: 20 Hz ~ 20 KHz ±2dB Dimensions: (W)3.54″x (H)2.13″ x (D)1.02″ – Weight: 0.88 Lbs Connects to turntable Input Sensitivity: 3mV at 50K Ohms (phono) Output: 2V max (P-P) at 10K Ohms Includes power adapter 12V DC THD: 0.08% @ 1KHz and 3mV Input | S/N Ratio: 70dB | Frequency Response: 20Hz to 20KHz @ 2dB
This universal 1/2″-mount headshell for 4-pin turntable cartridges features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with color-coded headshell lead wires and cartridge mounting hardware. The AT-HS1 Universal Headshell fits both the AT-LP120-USB, AT-LP240-USB and AT-LP1240-USB Direct-Drive Professional Turntables.
Cleans records as you play. Unlike a handheld cleaning brush, this does require a small amount of setup. Instructions are included and installation time is around 5-10 minutes. The earth wire dissipates static as the record plays, via the fine record brush fibre.
NEW Genuine Pro-Ject 2Xperience Replacement Drive Belt
New Highest quality turntable belt, 17.2″/43,68 cm Inside Circumference x 0.157″/ 0,40 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
New Highest quality turntable belt, 24.5″/62,23 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
New Highest quality turntable belt, 38.8″ Inside Circumference x 0.158″ Wide x 0.025″ Thick Turntable Belt
Audio Technica VM Series dual magnet cartridge, Aluminum cantilever , 0.6 mil Diamond conical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
The VM520EB/H combo kit includes the VM520EB elliptical bonded dual moving magnet cartridge premounted on the AT-HS10BK universal 1/2″-mount headshell.
Audio Technica VM Series dual magnet cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
The Nagaoka MP-150 phonograph cartridge offers superior clarity, detail and dynamic contrast and offers fine solid bass, superb fluidity across the frequency spectrum, and sweet highs. Features -Superfine polished special eliptical diamond stylus -Powerfull samarium cobalt magnet -Hardened low-mass, tapered aluminum alloy cantilever for very high fidelity -Carbon fibre reinforced plastic shoe -Anti ferro magnetic permalloy shield casing Stylus replacement: Nagaoka JN-P150 The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.
The ATH-WS990BT wireless over-ear headphones combine exclusive 53 mm Deep Motion Drivers with large, high-flux magnetic circuitry and Bluetooth technology to deliver vibrant full-range wireless audio with invigorating bass. The powerful magnetic force of the circuitry results in dynamic, well-tailored diaphragm response to reproduce deep, clear low frequencies and detailed mid-to-high frequencies.
The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Package Content: Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
System Requirements: PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
0.4 X 0.7 mil Diamond Elliptical tip needle , 33 or 45rpm NOT for 78rpm.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 grams tracking pressure
High quality Elliptical needle made by Tonar
0.7 mil Diamond conical tip needle ,for 78rpm , 3,0 – 5.0 grams tracking pressure
Orders shipped within 24 hours
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm ONLY , 0,75 – 1,5 grams tracking pressure
$ 89.95
Out of stock
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm Only , 0,75 – 1,5 grams tracking pressure
White
Jico
Elliptical
Yes
D71E, D-71 EE, D-78 E, D712E, D71EE, D78E, DL-2E, DL2E, DLC, TLE, XL-10, XL-25U, XL-5, XL25U, XP-C
16, 33, 45
0,5 – 1,5 grams
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 3,0 grams tracking pressure
0.4 X 0.7 mil Diamond elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 3,0 grams tracking pressure