MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
100 Pieces frosted inner sleeves for 7″ LP. HDPE, 50 micron thickness material, enough to protect vinyl records. Size: 7 x 7inch. . Easy to handle LP sleeves, simply to insert records. Offers resistance to static build up and protects against abrasions Can be used directly over the record
The AT6003R is designed to store three sets of headshells with mounted phono cartridges. The case holds the headshells securely in an upright position and includes three UV-protected capsules to cover the headshells/cartridges. A slit in the side of each capsule accommodates the headshell’s finger lift. Rubber feet on the bottom of the case provide increased stability.
Cartridges not included with the AT6003R.
The AT-PEQ30 phono equalizer is designed specifically to add a phono stage to a turntable setup or to upgrade a turntable’s built-in phono preamplifier.
It is compatible with turntables with MM (moving magnet) and MC (moving coil) cartridges. The AT-PEQ30 benefits from Audio-Technica’s years of analog audio expertise and uses the finest quality parts in a layout that is optimized for low noise and minimum distortion.
Generic Black Aluminum SME type Stanton Headshell, weighs approx 7gms
New high quality super elasticity rubber drive belt 24″ long x 0.20″ width x 0.02″ thick ( 610mm long x 5mm width x 0.5mm thick) Can replace all 24″ to 27″ belts, Perfect replacement or belt, specs equal or exceed original standards.
New Highest quality turntable belt, 16.9″/40,64 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.030″/ 0,076 Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 19.6 Inch / 49.8cm Inside Circumference (total length)
This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
This hand-built cartridge features an elliptical stylus; its shape enables it to more accurately trace the highest frequency record grooves giving it the advantage over ordinary spherical types. The lightweight shank also gives the stylus a lower tip mass than cheaper metal bonded types lending the cartridge an improved transient response.
The Nagaoka MP-200H MM phonograph cartridge offers superior clarity, detail and dynamic contrast.
Type: Moving magnet Cantilever: High-strength Boron Stylus type: Superfine elliptical bonded diamond with 0.4 x 0.7 mil Cartridge weight: 6.5 g Head shell’s weight: 9.5 g Output voltage @ 1kHz,5cm/sec: 4mV Frequency response: 20Hz-23kHz Channel balance @ 1kHz: > 1.5dB Channel separation @ 1kHz: > 25dB Recommended loading: 47k ohms Dynamic compliance: 7.2 x 10-6 cm/dyne Static compliance: 20 x 10-6 cm/dyne Tracking force range: 1.5 – 2.0 g Stylus replacement: Nagaoka JN-P200
This 0.6 mil conical cartridge fits half-inch mount turntables. It features durable dual-magnet design, excellent channel separation and low distortion for outstanding tonal quality.
Coil impedance: 2.8 k ohms (1 kHz) DC resistance: 410 ohms Recommended load capacitance: 100 to 200 pF Coil inductance: 400 mH (1 kHz) Vertical tracking angle: 20° Dimensions: 17.0 mm (0.67″) H × 16.8 mm (0.66″) W × 31.0 mm (1.22″) D Weight: 5.0 g (0.17 oz)
One place a DJ can’t compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6’ tangle-resistant cord with a molded 1/8” TRS connector and a 1/8” to ¼” TRS adapter, and padded headband and ear cups.
The M-Series ATH-M40x professional monitor headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.
More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
VERTIGAIN TECHNOLOGY®
VERTIGAIN technology® allows recording in unparalleled broadcast quality, with up to 10% more clarity & accuracy than other USB microphones.
2 Recording Patterns
Cardioid and Omni-directional. For different application you can choose one of them. Cardioid mode mostly use for Vocal recording , omnidirectional mode for video conference or for meeting applications.
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 3,0 grams tracking pressure
7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm
The Nagaoka NMP-2.0 Stylus is a compromise tip used for Mono and badly worn LPs (16/33/45) Tracking force: 1.5-3 grams Nagaoka 2.0 mil Mono stylus is for the entire Nagaoka MP series
Orders shipped within 24 hours
Diamond 0.3 x 0.7 mil bonded conical tip needle, 16 or 33 or 45rpm NOT for 78rpm , 1 – 2.5 grams tracking pressure.
$ 32.95
Blue
Normarh, Pfansthiel, Aiwa, EVG, Kenwood, Sanyo, Sharp
Conical
no
119-D7, 617-D
4157929440 ST-34D ST34D JVC CARTRIDGES MD-1032 MD1032 JVC MODELS MF-33 MF33 MF-33DL MF33DL JVC NEEDLES DT-36 DT36, ADC CARTRIDGE/Needle RLM-1 RLM1 RLM-I RLMI (RML-1 RML1 RML-I RMLI) AIWA NEEDLES AN-F10 ANF10 BSR LT33 LT43 DUAL NEEDLES DN-105 DN105, ADC Model LT-32 LINEAR TT, DENON MODELS DPF3V DENON CARTRIDGES DSN-68 DSN68 EVG NEEDLES PM2239D FISHER NEEDLES STG-7 STG7, KENWOOD MODELS P-D1TV PD1TV ROXY-D1TV ROXYD1TV KENWOOD NEEDLES N-65 N65 MGA MODELS LT-55 LT55 LT-76 LT76 MGA NEEDLES LT55 LT-75 LT75 ONKYO MODELS PL-XL PLXL RADIAN XICD CP1100A CP-1100A
1-2.5 grams
Replacement JNP300 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip
Audio Technica VMN20EBstylus specified for VM520EB Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
Replacement JNP500 stylus with spherical tip and aluminium alloy cantilever. Cantilever: Boron Stylus: Line contact naked block diamond stylus tip
Audio-Technica AT-VMN95EN stylus specified for AT-VM95EN cartridge, Special elliptical diamond tip for good fidelity , 0.3 x 0.7 mil Diamond elliptical needle , 1.8 – 2.2 grams tracking pressure