Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights.
Dimensions: 14 mm (0.55″) diameter × 27 mm (1.06″) to 39 mm (1.54″) height*
Lift bar movable width: 3 mm (0.12″)
Weight: Approx. 21 g (0.74 oz)
Accessories: Double-sided tape ×4, Spacer ×2 (14 mm (0.55″) diameter × 12 mm (0.47″) height; 14 mm (0.55″) diameter × 24 mm (0.94″) height)
* In standby. Height can be adjusted by using the height-adjustment knob and included spacers.
ISonic P4875II Motorized Ultrasonic Vinyl Record Cleaner, 2Gal/7.5L, 110V. It comes with mortorized fixtures designed to hold five 12″ or 10″ vinyl records, one 8-OZ bottles of cleaning solution concentrate, one box of lab grade Kimwipe nonfiberous tissue for drying the records. The motor with reducer rotates at 5RPM. 5 records can be cleaned at the same time. Flexible with different combinations of records of different sizes. Fixture can be mounted either on the left or right side of the unit depending on whether the operator is right or left handed. Label protectors with o-ring seals protect the label areas while cleaning. The cleaning solution is a super concentrate. Use 2 cap-fuls for a full tank of water. The ultrasonic cleaner equipped with 3 industrial grade ultrasonic stack transducers which are twice stronger and more durable compared to wafer transducers used by some manufacturers in their commercial models and 3 ceramic heaters. Each transducer is controlled by an individual PCB for best efficiency. This unit has unmatched cleaning power. Full range 30-min. timer with quick set: 10, 15, 20, 25, 30 and 5 minutes, and reducing button for every minute in between. Drainage valve makes it easy to discharge water. Hose is supplied. Heater with 5 settings: 104 to 140 °F or 40 to 60 °C. Thermometer to show approximate actual temperature ranges. Do not use heater for vinyl records. Cooling fan helps for longer operation. Overheat protector prevents the unit being overused which could cause overheating. Quieter than most competitors’ products. Cover holder. This unit is built solidly with very thoughtful designs and high reliability.
Complete cleaning kit includes everything needed to keep your music sounding great. Includes a carbon fiber record brush, stylus cleaner, CD cleaner, cleaning fluids and an anti-static record cloth. All are packaged in a convenient clam shell case for storage. Pfanstiehl.s carbon fiber brush is made of thousands of carbon fibers. It effectively cleans the records by taking the dust out of the record grooves and eliminates the static electricity inherent to vinyl. The anti-static record cloth is an easy to use soft cloth that not only cleans your records but also removes static and lubricates the vinyl playing surface. It protects your valuable collection while preventing dust buildup in the grooves. Features Everything needed to keep your music sounding great! Includes a carbon fiber record brush, stylus cleaner, CD cleaner, cleaning fluids and an anti-static record cloth All are packaged in a convenient clam shell case for storage Pfanstiehl.s carbon fiber brush is made of thousands of carbon fibers and effectively cleans the records by taking the dust out of the record grooves and eliminates static electricity
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .046 Inch / 1.2mm Thick and Wide 15.75 Inch / 40cm Inside Circumference (total length)
Turntable and phonograph record player Belt 21.4″
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 20.0 Inch / 50.8cm Inside Circumference (total length
New Highest quality turntable belt, 17.2″/43,68 cm Inside Circumference x 0.157″/ 0,40 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.
The Nagaoka MP-300 MM phonograph cartridge offers sophistication, refinement and high-definition at all audible frequencies thus making it one of our favorite phonograph cartridges. It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP300 is an advanced technology cartridge that is destined to become a classic out of the box.
Exclusive super rigid body for ultra resonance and superb fidelity
Superfine polished special elliptical bonded diamond stylus
Powerful samarium cobalt magnet
Hardened low-mass, high strength boron cantilever
Carbon fibre reinforced plastic body
Type: Moving magnet
Cantilever: High-strength Boron
Stylus type: Superfine elliptical diamond with 0.4 x 0.7 mil
Cartridge weight: 8 g
Head shell’s weight: 13.5 g
Output voltage @ 1kHz,5cm/sec: 3mV
Frequency response: 20Hz-25kHz
Channel balance @ 1kHz: > 1dB
Channel separation @ 1kHz: > 25dB
Recommended loading: 47k ohms
Dynamic compliance: 7.2 x 10-6 cm/dyne
Static compliance: 20 x 10-6 cm/dyne
Tracking force range: 1.3 – 1.8 g
Stylus replacement: Nagaoka JN-P300
Provides a lively, vigorous, and dynamic sound.
Reproduces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 8 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
N-44-7 IMPROVED is attached to this cartridge
Made in Japan
The ATH-WS990BT wireless over-ear headphones combine exclusive 53 mm Deep Motion Drivers with large, high-flux magnetic circuitry and Bluetooth technology to deliver vibrant full-range wireless audio with invigorating bass. The powerful magnetic force of the circuitry results in dynamic, well-tailored diaphragm response to reproduce deep, clear low frequencies and detailed mid-to-high frequencies.
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
Pro DJ Performance
Hard working DJs require headphones for airtight performances. A quality set of headphones can be the difference between a good show and a great one. Our HF325 packs an incredible amount of sound quality into a compact, noise isolating design that won’t hog all of the space in your gig bag.
All about that bass
Starting with recording studio grade sound quality, the HF325 reveals the critical detail in your mix. The on-ear, noise isolating earcups reduce ambient noise to a minimum, making them ideal for use in loud club environments. The immediate, up-front sound signature is like a microscope for your ears. Vocals are intimate, bass is tight and punchy, and the subtle nuances in tracks are exposed with smooth, rich detail.
Hands and ears on the mix
The rotating earcup makes single-ear monitoring a cinch. No more pinching a stiff set of cans between your shoulder and cheek just to get a peek at the main mix and cue mix. We made it practical to keep your hands on the mix, not the headphones. A big upgrade from bundled and all-purpose headphones, the HF325 provides the features you need to perform at your best.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
High quality Elliptical needle made by Tonar
0.7 mil Diamond Conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 4,0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 3,0 grams tracking pressure
Diamond 0.6 mil conical tip needle, 1.0 – 1.5 grams tracking pressure. (1.25 nominal), 16, 33 or 45rpm, NOT for 78RPM.
Orders shipped within 24 hours
Showing all 3 results
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 3,0 grams tracking pressure