Customers should anticipate order delays as important safety measures, including physical distancing, means it takes longer for Courrier and Postal services to process the heavy parcel volume they are handling.
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
You will receive a premium quality black aluminum headshell fits any S-Shaped or J-Shaped tone-arms. It will fit many brands including Pioneer, Yamaha, Marantz, Technics, Panasonic, Sony, etc, and comes with new wires also. Bayonet style, 1/2″ mount cartridges. The four pins seen on the end make contact with the lead wires seen inside the tonearm.
This high quality record stabilizer is ideal for maintaining stability, and improving acoustic quality. Piano notes become crystal-clear, mid-range is vibrant and alive, while vocals soar realistically.
High quality non-magnetic alloy weight
Accommodate spindle diameter up to 7mm, heights up to 23mm
Soft base pad assure protection of the record label
Strobe scale support: 33rpm and 45rpm
Product height: 33mm (1 5/16″)
Product diameter: 77mm (3″)
Product weight: 280g
New Highest quality turntable belt, 31.5″ Inside Circumference x 0.158″ Wide x 0.025″ Thick Turntable Belt
New Highest quality turntable belt, 24.5″/62,23 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 20.0 Inch / 50.8cm Inside Circumference (total length
New high quality super elasticity rubber drive belt
25″ long x 0.20″ width x 0.02″ thick ( 544mm long x 5mm width x 0.5mm thick)
Can replace all 25″ to 27″ belts (170 to 200mm BELT), Perfect replacement or belt, specs equal or exceed original standards.
Audio-Technica P- mount AT85EP phonograph cartridges, Special elliptical diamond tip for good fidelity ,0.3 x 0.7 mil elliptical Conical needle , 1 – 1.5 grams tracking pressure
Tetrad Factory part numbers would include ranges from A0 thru A4 B0 thru B4 C0 thru C4 Phonograph cartridge Pfanstiehl P-410D, with M853-DS77 stylus and needle guard, universal Tetrad replacement for all Tetrad Cartridges having blue connector socket, and needle stamped with any of the following: 50, 51, 52, 53, 54, 60, 61, 62, 63, 64, A0-A4; B0-B4; C0-C4; T5HD most popular stamp on needle handle is T5HD most popular stamp on cartridge socket is TC8HO or TC8H0. Comes with Arm braquet
The Nagaoka MP-200 phonograph cartridge offers superior clarity, detail and dynamic contrast. Features -Superfine polished special eliptical diamond stylus -Powerfull samarium cobalt magnet -Hardened low-mass, tapered aluminum alloy cantilever for very high fidelity -Carbon fibre reinforced plastic shoe -Anti ferro magnetic permalloy shield casing Stylus replacement: Nagaoka JN-P200 The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.
High quality Diamond tip cartridge made by Grado
Four Piece OTL Cantilver Technology
Most Advanced DJ Cartridge Available
The Klipsch T5M Wired Earphones offer superior comfort and unparalleled acoustic quality on-the-go.
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
Marantz Professional is proud to present the MPM-1000 Studio Series microphone, a high-quality condenser mic that delivers studio-grade audio performance along with unexcelled value. The MPM-1000 Studio Series microphone exemplifies Marantz Professional’s commitment to users who demand no-compromise components that fit within a realistic budget.
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
0.4 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5.0 grams tracking pressure
High quality Conical needle made by Tonar
Orders shipped within 24 hours
Showing the single result