MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
Black Velvet Record Brush good for cleaning records.
The lightweight aluminum AT-HS10BK is a universal ½”-mount headshell for 4-pin turntable cartridges. Featuring an aluminum die-cast body, the AT-HS10 is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of headshell to enable precise placement of the stylus onto the record. The headshell is equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws
Universal Ground Wire for Turntables, Amplifiers, Speakers, etc.
New Highest quality turntable belt, 27.3″/69,34 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.024″/ 0,060 Thick Turntable Belt
NEW Genuine Pro-Ject 2Xperience Replacement Drive Belt
New Highest quality turntable belt, 31.5″ Inside Circumference x 0.158″ Wide x 0.025″ Thick Turntable Belt
Brand New turntable beltThis is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .025 Inch / .6mm Thick .203 Inch / 5.16mm Wide 25.0 Inch / 63.5cm Inside Circumference (total length)
High quality Elliptical cartridge made by Grado
Main features Produces a well balanced and solid sound. Generates a broad, smooth sound with a musical audio response and 3D audio image, similar to the specification of the genuine Shure M44G cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 6 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Stylus specs Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
Replacement needles N44G Improved is attached to this cartridge Made in Japan
ASTATIC 51-3 AMI ROCKOLA JUKEBOX 78 RPM only
This is a cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The 1042 uses a nude, natural-diamond stylus with a Gyger S profile. This is a revolutionary line-contact type which is shaped to more closely resemble the record cutting head than any previous design. The stylus profile is the main factor governing overall sound quality in a cartridge and the shape of the Gyger S with its 6 µm radius allows it to trace the smallest groove detail with complete fidelity. Mid-range tonality is incredibly accurate and precise with high frequency sibilance banished. The extended side wall contact of the Gyger-S diamond also gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.
The M50x are one of our most acclaimed audio solutions and our best-selling headphones. Based on the ATH-M50, the M50x include an upgraded detachable cable for convenience and versatility, perfect for the studio, gaming or when you’re out on the move. Enjoy passive noise isolation through the comfortable ear cups designed to keep you in the zone and in the game, while their large aperture drivers deliver our industry-loved sound signature.
Specifications:
Type: Open-Back Reference
Driver: 45 mm
Sensitivity: 97 dB/mW
Frequency Response: 5 to 40,000 Hz
Maximum Input Power: 1,000 mW
Impedance: 470 ohms
Input Jack: 3.5 mm (1/8″) Stereo Headphone Jack
Weight (Without Cables): Approx. 199 g (7.0 oz)
Included Accessories: ・Detachable cable (3.0 m (9.8’) / 3.5 mm (1/8”) gold-plated stereo mini-plug) ・6.3 mm (1/4”) stereo adapter ・Pouch
For product improvement, the product is subject to modification without notice.
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
The ATH-WS990BT wireless over-ear headphones combine exclusive 53 mm Deep Motion Drivers with large, high-flux magnetic circuitry and Bluetooth technology to deliver vibrant full-range wireless audio with invigorating bass. The powerful magnetic force of the circuitry results in dynamic, well-tailored diaphragm response to reproduce deep, clear low frequencies and detailed mid-to-high frequencies.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 2.5 grams tracking pressure
Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 1.0 – 3.0 grams tracking pressure
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.0 – 1,5 grams tracking pressure
Orders shipped within 24 hours
Showing the single result
LABEL : B0018849-01
180G Vinyl
