MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
The lightweight aluminum AT-HS10SV is a universal ½”-mount headshell for 4-pin turntable cartridges. Featuring an aluminum die-cast body, the AT-HS10 is designed to keep vibration to the bare minimum. The finger lift is positioned near the front of headshell to enable precise placement of the stylus onto the record. The headshell is equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws
The Ultimate Record Cleaning Brush, with three rows of naturally anti-static goat’s hair bristles that dig deep into record grooves, loosening dirt and debris in the process. Superbly effective and gentle on precious vinyl collections, for both wet and dry cleanings.
Features: Diameter approx. 69 mm. Height: approx. 28 mm. Weight: approx. 550 g
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .046 Inch / 1.2mm Thick and Wide 15 Inch / 38cm Inside Circumference (total length). Can be used for belt sizes between 15-19″ long.
Go back
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 20.0 Inch / 50.8cm Inside Circumference (total length
New Highest quality turntable belt, 38.8″ Inside Circumference x 0.158″ Wide x 0.025″ Thick Turntable Belt
New Highest quality turntable belt, 24.5″/62,23 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
High cost performance. Pop and jazz to the best high-performance, low-cost entry model MP-type stereo cartridge head shell with MP-100H ● output voltage: 5mV 5cm / sec
● frequency response: 20Hz ~ 20KHz
● Channel separation: 22dB 1KHz
● channel balance: 2.0dB following
● load resistance: 47KΩ ● load capacity: 100pF
● cantilever: aluminum alloy
● needle tip: 0.6mil cone and joining diamond
● proper needle pressure: 1.8 ~ 2.3g
● cartridge self-weight: 6.5g
● with head shell its own weight: 15.9g
High quality Elliptical cartridge made by Grado
Audio Technica VM Series dual magnet cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
Specifications:
Type: Open-back reference
Driver: 45 mm
Sensitivity: 93.3dB/mW
Frequency response: 5 to 40,000 Hz
Maximum input power: 1,600mW
Impedance: 50 ohms
Input Jack: 3.5 mm (1/8″) Stereo Headphone Jack
Weight (without cable): Approx. 207g (7.3 oz)
Included accessories: ・Detachable cable (3.0 m (9.8’) / 3.5 mm (1/8”) gold-plated stereo mini-plug) ・Detachable cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug) ・6.3 mm (1/4”) stereo adapter ・Pouch
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
0.7 mil Diamond Conical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 2,5 – 3,5 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5.0 grams tracking pressure
Diamond 0.6 mil conical tip needle, 1.0 – 1.5 grams tracking pressure. (1.25 nominal), 16, 33 or 45rpm, NOT for 78RPM.
Label: B0016563-01
Blue Marble Vinyl
Label: B0037609-01
Orders shipped within 24 hours
Showing the single result
