You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
The AT617a cartridge stylus cleaner is a specially formulated polyurethane gel that gently removes dirt particles from the stylus tip when the stylus is lowered onto it. The gel’s surface is washable and will remain tacky for years.
Material: Polyurethane gel
Dimensions: 37.5 mm (1.48″) diameter × 17 mm (0.67″)
This is a Philmore Phono Pre-Amplifier model PHIPRE600. This stereo/phono pre-amplifier will allow you to replace a crystal or ceramic stereo cartridge with a better quality magnetic stereo cartridge while using the original stereo amplifier supplied with your turntable. The use of this pre-amplifier in conjunction with a magnetic cartridge will give you CD quality sound out of your vintage turntable. This pre-amplifier will allow you to take phono signals to line-level. Use this to amplify and interface with mixers, main or monitor systems, audio workstations or sound cards. Uses standard RCA-RCA dual phono cables (not included) with easy in/out plug-ins and works with all magnetic cartridges. This pre-amplifier allows the use of turntables on newer equipment not having a discrete “Phono” input. With this device you can plug into newer equipment using their AUX, DVD, TAPE or CD line level inputs. Features: Convert Phono signal to line level Works with turntables using a magnetic cartridge Good for transferring your old LPs to digital media storage Frequency response: 30-20K Impedance: 50K Ohms Gain: 50X (in+5V out) Max Output: 1.8V Max input: 30mV S/N Ratio: Over 60dB Power requirements 117VAC, 50/60 Hz, 0.1 Watt
New Highest quality turntable belt, 31.5″ Inside Circumference x 0.158″ Wide x 0.025″ Thick Turntable Belt
New Highest quality turntable belt, 35.1″ Inside Circumference x 0.184″ Wide x 0.035″ Thick Turntable Belt
New Highest quality turntable belt, 18.7″/47,49 cm Inside Circumference x 0.120″/ 0,30 cm Wide x 0.032″/ 0,081 Thick Turntable Belt
New Highest quality turntable belt, 17.2″/43,68 cm Inside Circumference x 0.157″/ 0,40 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
Audio Technica VM Series dual magnet cartridge, Aluminum cantilever , 0.6 mil Diamond conical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
The Nagaoka MP-500 phonograph cartridge offers the highest musical and creative expression of the new MP series. It expertly extracts and reproduces with vivid, colorful and dimensional clarity what others miss. Meet our little friend – the Nagaoka MP-500 phonograph cartridge – the master of the grooves. Features -Exclusive super rigid body for ultra resonance and superb fidelity -Superfine line contact diamond stylus -Powerfull samarium cobalt magnet -Low-mass, high strenght boron cantilever -Carbon fibre reinforced plastic shoe -Anti ferro magnetic permalloy shield casing Stylus replacement: Nagaoka JN-P500 The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.
This is a cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The 1042 uses a nude, natural-diamond stylus with a Gyger S profile. This is a revolutionary line-contact type which is shaped to more closely resemble the record cutting head than any previous design. The stylus profile is the main factor governing overall sound quality in a cartridge and the shape of the Gyger S with its 6 µm radius allows it to trace the smallest groove detail with complete fidelity. Mid-range tonality is incredibly accurate and precise with high frequency sibilance banished. The extended side wall contact of the Gyger-S diamond also gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.
All Goldring 2000 series cartridges feature Moving Iron technology. This lends them the high levels of detail associated with more expensive moving coil designs whilst retaining the convenience of a replaceable stylus and high output associated with moving magnet types. The cartridge employs a fixed samarium cobolt magnet and high output coil combination so that a very light iron/nickel cantilever end-piece can be used instead of the much heavier permanent magnet used in conventional designs. This reduces the moving mass allowing the stylus to trace the record groove more faithfully. Because of their high output, Goldring 2000 series cartridges should be used with the standard moving magnet phono input of an integrated amplifier.
Increased resolution is gained for this cartridge by the use of a low-mass, “Vital” shank, nude diamond stylus and tapered aluminum cantilever. This polyhedral, line-contact profile was chosen because it has a very low tip-mass and a large contact area whilst being very narrow from front to back, enabling the accurate retrieval of even the highest frequencies in the recording. The stiff aluminium cantilever resists the establishment of unwanted resonances which are unable to propagate towards the generator due to its tapered shape. The 2400 has a low-resonance aluminium body providing a rigid connection to the tonearm, which improves bass power and clarity .
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
Marantz Professional is proud to present the MPM-1000 Studio Series microphone, a high-quality condenser mic that delivers studio-grade audio performance along with unexcelled value. The MPM-1000 Studio Series microphone exemplifies Marantz Professional’s commitment to users who demand no-compromise components that fit within a realistic budget.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
VERTIGAIN technology® allows recording in unparalleled broadcast quality, with up to 10% more clarity & accuracy than other USB microphones.
2 Recording Patterns
Cardioid and Omni-directional. For different application you can choose one of them. Cardioid mode mostly use for Vocal recording , omnidirectional mode for video conference or for meeting applications.
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
0,3 x 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,5 grams tracking pressure
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 2.5 grams tracking pressure
Stereo LP tip (0.7 mil Diamond). For 16, 33 or 45rpm
0.7 mil Diamond Conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
Orders shipped within 24 hours
Showing all 2 results
33 or 45 or 78rpm