SC5 Stylus Cleaner Protect and preserve your valuable stylus with our new SC-5 Stylus Cleaner. Each bottle comes with an applicator to apply a small amount of fluid to the stylus brush. Each kit includes 15 ml bottle with applicator and 1 high quality stylus brush. NOTE: Always brush from back to front! Start behind the stylus and pull forward
Bubble shows turntable level at a glance to within 1 degree of accuracy, and test turntable platter speed Easy to use Tests 33-1/3 rpm, 45 rpm, and 78 rpm speeds Works on 50 Hz and 60 Hz diagram.
Turntable Spirit Level Gauge
Center Hole Diameter 7.5mm
Headshell is CNC high precision machined from a single block of aircraft grade aluminum, Lightness and durability high quality aluminum
Black anodized aluminium, so it is a durable treatment that resists scratching and marring
Two lengthened long ( 16mm ) cartridge mount hole, much longer adjusting range than anyother headshell, fit almost all tonearms and cartridges
The connector fit most turntables with the S-Shaped, straight or SME type 4 pin connection tonearm with a standard H-4 Bayonet Mount. The S-shape H-4 type tonearm is the most commonly used tonearm system by turntable manufacturers like National, Panasonic, Technics, Sony, Telefunken, Denon, Sansui, Reloop, Pioneer, SME, DYNAMIC SPEAKER, Schneider, UNITRA etc., just to name a few. The connector dimensions are 8 mm diameter x 12 mm length.
All 4 pins on headshells are 24K gold plated. Comes with nuts and screw
New Highest quality turntable belt, 16.9″/40,64 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.030″/ 0,076 Thick Turntable Belt
New high quality super elasticity rubber drive belt
25″ long x 0.20″ width x 0.02″ thick ( 544mm long x 5mm width x 0.5mm thick)
Can replace all 25″ to 27″ belts (170 to 200mm BELT), Perfect replacement or belt, specs equal or exceed original standards.
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .046 Inch / 1.2mm Thick and Wide 15.2 Inch / 38.1cm Inside Circumference (total length)
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 20.0 Inch / 50.8cm Inside Circumference (total length
The Nagaoka MP-150 phonograph cartridge offers superior clarity, detail and dynamic contrast and offers fine solid bass, superb fluidity across the frequency spectrum, and sweet highs. Features -Superfine polished special eliptical diamond stylus -Powerfull samarium cobalt magnet -Hardened low-mass, tapered aluminum alloy cantilever for very high fidelity -Carbon fibre reinforced plastic shoe -Anti ferro magnetic permalloy shield casing Stylus replacement: Nagaoka JN-P150 The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.
The Stanton 750 professional cartridge is designed to exceed the demands of the professional DJ and deliver a wide dynamic range of audio for the vinyl record enthusiast. A professional grade cartridge for digital mixing, scratch performance and vinyl recordings, the Stanton 750 delivers consistent sonic purity for all applications.
The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.
The E1 cartridge, the first in the range, utilises a carbon-fibre reinforced cantilever and bonded, spherical (0.6 mil) stylus with a round shank. Carbon is an effective alternative to more premium aluminium or boron materials, producing comparable results in most entry level hi-fi applications.
Provides a lively, vigorous, and dynamic sound.
Reproduces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.
Specs [Technical specifications] phono height : 16mm / frequency range 20 Hz – 20 kHz / weight : 5.6g / output voltage 8 mV (1kHz, 5cm/sec.) / Recommended Load : 47 KΩ
Cantilever : aluminum alloy, tubular / Diamond tip : spherical (0.7mil) / 1.6 mil wall thickness / 34.5 mil diameter
N-44-7 DJ Improved is attached to this cartridge
Made in Japan
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
VERTIGAIN® technology helps to increase quality and clarity by up to 10% compared to other digital USB microphones. As sound waves move in a vertical direction, the wave reaches the 3 condensers without being scattered by any microphone mesh.
4 Dedicated Recording Modes
The MDRILL One will be only mic you need!
4 different polar settings offer the ultimate flexibility. Record vocals, instruments, podcasts, interviews, conference calls, streaming and much, much more!
Simply press the mode button and choose between Cardioid, Stereo, Bi-Directional or Omni-Directional patterns to find the best performance setting. So, whether you stream from home or need to record your next masterpiece, the MDRILL One Pro will help you produce studio-quality recordings – every time.
Thronmax Mdrill One Black 48khz, Fabric Travel Case, Dust-proof Protective Sleeve, Foam Windshield, Pop Filter, User Guide, 3 meters Type C braided cable, Advanced Boom Adapter, 3/8” Female, 5/8″ Male Adapter
PC/Mac, Windows 8/Windows 7/Windows Vista, Mac OS X (10.7-10.9)
Product Code: M2P-B Jet Black 96 Kit
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
VERTIGAIN technology® allows recording in unparalleled broadcast quality, with up to 10% more clarity & accuracy than other USB microphones.
2 Recording Patterns
Cardioid and Omni-directional. For different application you can choose one of them. Cardioid mode mostly use for Vocal recording , omnidirectional mode for video conference or for meeting applications.
.03 X .07 mil Diamond elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 2,5 grams tracking pressure
Audio-Technica ATN3600L stylus specified for AT3600 cartridges, Special conical diamond tip for good fidelity ,0.6 mil Diamond Conical needle , 3 – 4 grams tracking pressure
Audio-Technica ATN95E stylus specified for AT95E cartridges, Special elliptical diamond tip for good fidelity , 0.4 x 0.7 mil Diamond Elliptical needle , 1.5 – 2.5 grams tracking pressure
0.4 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
Orders shipped within 24 hours
Showing all 3 results
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 3,0 grams tracking pressure