Accessories
Affichage de 1–24 sur 166 résultats
-
AccessoriesPro-Ject Audio – Connect it – Line Cable RCA-C – 1.23M
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
(0 reviews)$ 109.99 Ajouter au panier -
AccessoriesPro-Ject Align It Cartridge Alignment Gauge
Makes Cartridge Set-Up A Breeze, Allowing You To Quickly And Properly Align Your Cartridge
Tool for cartridge alignment and adjustment
Special slip-proof tool for defining the turning centre of Pro-Ject tonearms
Adaptable to accommodate differing tonearm lengths
Also suitable for other manufacturers’ tonearms
Suitable for tonearms between 8″ (203mm) and 12″(305mm) effective length
(0 reviews)$ 179.99 Ajouter au panier -
-
AccessoriesPro-Ject Audio Record Box E Phono Pre-Amp MM/MC
This introductory level phono stage is designed specifically to amplify your moving magnet or moving coil cartridge output to line level. The form factor of the unit is small and subtle, so it can be placed near the turntable/amp without being intrusive.
- Amplification and RIAA equalization for MM & MC ; Digitalization of vinyl for recording direct to USB with suitable recording programs
- Automatic recognition, no additional drivers needed; Runs on Windows and Mac OS operating systems
- SMD circuitry with special low noise components; Small size allows installation close to record player
- Gold plated RCA connection sockets; Outboard power supply included
- Input Impedance/Capacitance: MC: 100ohms/120pF (low output MC) / MM: 47kohms/120pF (MM or high output MC)
(0 reviews)$ 149.99 Ajouter au panier -
-
AccessoriesPro-Ject – Phono Box MM, stand alone phono stage for record player/ Pre-amp
Since many modern amplifiers no longer have a dedicated phono input, the phono box mm from Pro-Ject is the perfect addition to your turntable setup. Compatible with nearly any moving magnet cartridge, the phono box mm gives you a superb audiophile music experience at an entry-level price. The utilization of advanced circuitry keeps noise and distortion extremely low, and the metallic case and outboard DC power supply keeps the unit free from electromagnetic interference. Since it’s only slightly larger than a pack of playing cards, the phono box mm can be placed nearly anywhere. The RCA input and output sockets are gold-plated to preserve sound quality and can be connected directly to any line-level input (aux, CD, Etc.) on your amplifier.
(0 reviews)$ 119.95 Ajouter au panier -
AccessoriesPro-Ject Sweep It S2 Black Anti-Static Record Cleaning Arm
- Stabilisation using neodymium magnet
- Prevents the well-known running brush phenomenon of “skating”
- Adjustable in height, flexible positioning
- Natural hair brush with extremely low electronic negativity
- Cleans LPs during playback
There have been a broom since the early 70s and do their job sometimes well but less well. A commonly observed phenomenon is the so-called “storm”, or “skating”, the broom arm towards the center of the plate without running synchronously with the sampling needle. The latest developments therefore also consistently rely on measures that prevent exactly that. With the highly effective neodymium magnet a material has been available for quite some time, which can be used right here. Sweep it S2 was developed in collaboration with Klaus Mick and uses its patented principle to magnetically stabilize the broom An intensive research and development of technical and physical properties and empirical experimental arrangements have led to the product that you hold straight in your hands.
(0 reviews)$ 174.99 Ajouter au panier -
AccessoriesPro-Ject Audio – Connect it Model Phono RCA-CC – 1.23M RCA-CC
Signal cables optimised for use with turntables. Highly flexible with low capacitance and perfect shield. These cables were developed to have low colouration and are handmade in Europe. “State-of-the-Art” components for leads, dielectric and plugs were chosen after intense listening tests. Specific lengths were chosen because of their significant advantages when carrying audio signals. Three quality levels are available (SI / CC / C).
(0 reviews)$ 129.99 Ajouter au panier -
AccessoriesPro-Ject Audio – Grease it – Turntable Bearings Lubricant
Bearing lubricant
How to use Grease it
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Grease it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some grease off your turntable to keep it looking clean.
Please only use Grease it for turntables with inverted bearings, like RPM Line, Xtension models and Signature Line. For non-inverted bearings you should use Lube it.
(0 reviews)$ 29.99 Ajouter au panier -
AccessoriesJelco HS-50 HS50 Turntable High Quality HeadShell – Black
Aluminium Alloy body
Universal mount
OFC litz lead wires with gold plated terminals
Gold plated pins
9.1 grams without screws
Fixing screws included(0 reviews)$ 64.95 Lire plus -
AccessoriesMicrofiber Cleaning and Polishing Cloth, 13″x13″, Pack of 4
iSonic microfiber cleaning and polishing cloth, 13″x13″, pack of 4. Lint free and streak free. Water absorbant. Size designed for cleaning and drying vinyl records. It can be used for wine glass polishing and other cleaning and polishing jobs.
(0 reviews)$ 19.99 Ajouter au panier -
AccessoriesiSonic Csvr01 Ultrasonic Vinyl Record Cleaning Solution Concentrate, 8oz
- 8-Oz bottle. No streak, no sulfuric acid, no phosphorus and no ammonia
- Works with iSonic ultrasonic vinyl record cleaners to clean vinyl records thoroughly in just minutes
- Remove dust, smudges and finger prints
(0 reviews)$ 19.99 Ajouter au panier -
AccessoriesiSonic P4875II Motorized Ultrasonic Vinyl Record Cleaner, 5 Disc
ISonic P4875II Motorized Ultrasonic Vinyl Record Cleaner, 2Gal/7.5L, 110V. It comes with mortorized fixtures designed to hold five 12″ or 10″ vinyl records, one 8-OZ bottles of cleaning solution concentrate, one box of lab grade Kimwipe nonfiberous tissue for drying the records. The motor with reducer rotates at 5RPM. 5 records can be cleaned at the same time. Flexible with different combinations of records of different sizes. Fixture can be mounted either on the left or right side of the unit depending on whether the operator is right or left handed. Label protectors with o-ring seals protect the label areas while cleaning. The cleaning solution is a super concentrate. Use 2 cap-fuls for a full tank of water. The ultrasonic cleaner equipped with 3 industrial grade ultrasonic stack transducers which are twice stronger and more durable compared to wafer transducers used by some manufacturers in their commercial models and 3 ceramic heaters. Each transducer is controlled by an individual PCB for best efficiency. This unit has unmatched cleaning power. Full range 30-min. timer with quick set: 10, 15, 20, 25, 30 and 5 minutes, and reducing button for every minute in between. Drainage valve makes it easy to discharge water. Hose is supplied. Heater with 5 settings: 104 to 140 °F or 40 to 60 °C. Thermometer to show approximate actual temperature ranges. Do not use heater for vinyl records. Cooling fan helps for longer operation. Overheat protector prevents the unit being overused which could cause overheating. Quieter than most competitors’ products. Cover holder. This unit is built solidly with very thoughtful designs and high reliability.
(0 reviews)$ 1,199.00 Ajouter au panier -
AccessoriesHeadshell for DUAL CS450, CS455, CS505, CS530, CS616, CS620, CS221
Will fit these Dual turntables models: CS 431, CS450, CS455, CS505, CS515, CS530, CS616, CS620, CS630, CS2210, CS2215, CS2225, CS2235, CS275361, CS280554, CS286945, CS289030
LEADWIRE:
– Oxygen free copper (OFC) for a cleaner sound. All of the terminals are phosphor copper and 24k gold plated for good electrical conductivity and non-allergy reaction. Terminals are hand soldered one by one
– Each wire and terminal is color coded for easy cartridge mounting.
– Mount on cartridge according to the color of the wire.
BLUE = LG (left ground)
GREEN = RG (right ground)
WHITE = L (left positive)
RED = R (right positive)(0 reviews)$ 29.95 Ajouter au panier -
AccessoriesUniversal Ground Wire for Turntables, Amplifiers, Speakers, etc
Universal Ground Wire for Turntables, Amplifiers, Speakers, etc.
- Oxygen Free Copper (OFC)
- 2 Fork type copper terminals
- 39 inches/ 1 meter length
(0 reviews)$ 9.95 Ajouter au panier -
-
AccessoriesDiscwasher RD2047Z D4+ Vinyl Record Care Refill
- D4+ vinyl record care refill, 1.69 fl. oz
- Safe for all vinyl records
- Removes dust, dirt and fingerprints from your vinyl records
- Can be use with any wet cleaning system but designed for refilling Discwasher RD1006 and RD1007Z kits
(0 reviews)$ 14.95 Ajouter au panier -
AccessoriesAudio Technica Phono Equalizer
The AT-PEQ30 phono equalizer is designed specifically to add a phono stage to a turntable setup or to upgrade a turntable’s built-in phono preamplifier.
(0 reviews)$ 319.99 Ajouter au panier -
AccessoriesAudio Technica Universal Headshell AT-HS6SV
This universal 1/2″-mount headshell for 4-pin turntable cartridges features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with color-coded headshell lead wires and cartridge mounting hardware. The AT-HS1 Universal Headshell fits both the AT-LP120-USB, AT-LP240-USB and AT-LP1240-USB Direct-Drive Professional Turntables.
(0 reviews)$ 39.99 Ajouter au panier -
AccessoriesAudio Technica Universal Headshell AT-HS6BK
This universal 1/2″-mount headshell for 4-pin turntable cartridges features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with color-coded headshell lead wires and cartridge mounting hardware. The AT-HS1 Universal Headshell fits both the AT-LP120-USB, AT-LP240-USB and AT-LP1240-USB Direct-Drive Professional Turntables.
(0 reviews)$ 39.99 Ajouter au panier -
AccessoriesAudio Technica Universal Headshell AT-HS1
This universal 1/2″-mount headshell for 4-pin turntable cartridges features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with color-coded headshell lead wires and cartridge mounting hardware. The AT-HS1 Universal Headshell fits both the AT-LP120-USB, AT-LP240-USB and AT-LP1240-USB Direct-Drive Professional Turntables.
(0 reviews)$ 24.99 Ajouter au panier -
AccessoriesAudio Technica Headphone Hanger
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
(0 reviews)$ 39.99 Ajouter au panier -
AccessoriesAudio Technica Universal Headshell AT-LH18H
The AT-LH18H is a 18-gram universal ½”-mount headshell, optimized to accommodate 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws, plastic washers, and a hexagonal wrench.
The cartridge is also available in 13-gram (AT-LH13H) and 15-gram (AT-LH15H) models for optimal compatibility with your cartridge/tonearm requirements.
(0 reviews)$ 119.99 Ajouter au panier -
AccessoriesAudio Technica Universal Headshell AT-LH15H
The AT-LH15H is a 15-gram universal ½”-mount headshell, optimized to accommodate 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws, plastic washers, and a hexagonal wrench.
The cartridge is also available in 13-gram (AT-LH13H) and 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements.
(0 reviews)$ 119.99 Ajouter au panier
