MON COMPTE
LISTE D’ENVIES
LISTE COMPARÉE
Salut.
Username*
Password*
Lost password?
Email*
Bubble shows turntable level at a glance to within 1 degree of accuracy, and test turntable platter speed Easy to use Tests 33-1/3 rpm, 45 rpm, and 78 rpm speeds Works on 50 Hz and 60 Hz diagram. Turntable Spirit Level Gauge Diameter 68mm Height 25mm Center Hole Diameter 7.5mm Weight 108grams
Features: Diameter approx. 69 mm. Height: approx. 28 mm. Weight: approx. 550 g
If you have a lot of records to clean, the Spin-Clean SPIN8OZ 8 Oz. bottle is for you, as this new, specially-formulated MKII Spin-Clean Record Washer 8 Oz. bottle of fluid is enough to clean up to 5600 records.
Remember too, there are never any harmful agents or alcohol in the Spin-Clean Record Washer Fluid, so your valued collection is always in good hands.
Turntable and phonograph record player Belt 13.3″
New Highest quality turntable belt, 25.7″ Inside Circumference x 0.200″ Wide x 0.027″ Thick Turntable Belt
New Highest quality turntable belt, 34.0″/86,36 cm Inside Circumference x 0.196″/ 0,49 cm Wide x 0.031″/ 0,078 Thick Turntable Belt
This is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .031 Inch / .79mm Thick .203 Inch / 5.16mm Wide 19.6 Inch / 49.8cm Inside Circumference (total length)
This is a very popular cartridge, found in most modern nostalgic type players. and dating back a decade or so across many brands. Noteably Chou Denshi CZ-800, & soundesign among others. Specs: Tracking Pressure: 2 – 4 grams Element: Ceramic .4 Volts Output
The Audio-Technica Consumer AT-VM95SH Dual Moving Magnet Cartridge features a special coil design, which delivers a powerful output level with high channel separation and low distortion for remarkable tonal quality. The cartridge can be mounted to a standard 1/2″ mount and features integrated threaded inserts, allowing it to be mounted with just two screws (no nuts required).
The Shibata stylus has two radii, similar to an elliptical stylus, but longer and more narrow. This allows for more surface contact and effective pickup of ultra-high frequencies with less groove stress or distortion. All VM95 Series share the same body, allowing the stylus to be replaced with any of the six interchangeable AT-VMN95 replacement styli. The Audio-Technica Consumer AT-VM95SH ships with mounting hardware and a non-magnetic screwdriver.
All Goldring 2000 series cartridges feature Moving Iron technology. This lends them the high levels of detail associated with more expensive moving coil designs whilst retaining the convenience of a replaceable stylus and high output associated with moving magnet types. The cartridge employs a fixed samarium cobolt magnet and high output coil combination so that a very light iron/nickel cantilever end-piece can be used instead of the much heavier permanent magnet used in conventional designs. This reduces the moving mass allowing the stylus to trace the record groove more faithfully. Because of their high output, Goldring 2000 series cartridges should be used with the standard moving magnet phono input of an integrated amplifier.
Increased resolution is gained for this cartridge by the use of a low-mass, “Vital” shank, nude diamond stylus and tapered aluminum cantilever. This polyhedral, line-contact profile was chosen because it has a very low tip-mass and a large contact area whilst being very narrow from front to back, enabling the accurate retrieval of even the highest frequencies in the recording. The stiff aluminium cantilever resists the establishment of unwanted resonances which are unable to propagate towards the generator due to its tapered shape. The 2400 has a low-resonance aluminium body providing a rigid connection to the tonearm, which improves bass power and clarity .
The AT-OC9XSH Dual Moving Coil cartridge with nude elliptical stylus is designed to provide outstanding channel separation.
The M-Series ATH-M40x professional monitor headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.
More About the M-Series Headphones Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year
The ATH-SR6BTBK Wireless Over-Ear Headphones let you enjoy amazing, high-fidelity audio whether you choose to listen over a traditional wired connected or via Bluetooth wireless technology. The headphones are compatible with Qualcomm aptX, AAC and SBC codecs, and connect easily with smartphones, tablets, music players, and other devices. Adding devices in the headphones’ memory is made even easier with NFC (Near Field Communication) functionality, which enables touch pairing and connection with any compatible device.
The ATH-SR6BTBK features powerful 45 mm drivers that are capable of reproducing Hi-Res Audio (5–40,000 Hz frequency response) when used with the included 1.2 m (3.9′) cable. The cable is equipped with mic and controls so it can also be used to operate devices in areas where Bluetooth wireless technology is prohibited or when headphone battery power is low. For wireless use, the headphones have a mic and volume/control switch built into the left earcup, making it easy to answer calls, adjust volume and handle music and video playback (play, pause, fast-forward, reverse, next/previous track).
Pro DJ Performance
Hard working DJs require headphones for airtight performances. A quality set of headphones can be the difference between a good show and a great one. Our HF325 packs an incredible amount of sound quality into a compact, noise isolating design that won’t hog all of the space in your gig bag.
All about that bass
Starting with recording studio grade sound quality, the HF325 reveals the critical detail in your mix. The on-ear, noise isolating earcups reduce ambient noise to a minimum, making them ideal for use in loud club environments. The immediate, up-front sound signature is like a microscope for your ears. Vocals are intimate, bass is tight and punchy, and the subtle nuances in tracks are exposed with smooth, rich detail.
Hands and ears on the mix
The rotating earcup makes single-ear monitoring a cinch. No more pinching a stiff set of cans between your shoulder and cheek just to get a peek at the main mix and cue mix. We made it practical to keep your hands on the mix, not the headphones. A big upgrade from bundled and all-purpose headphones, the HF325 provides the features you need to perform at your best.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
VERTIGAIN TECHNOLOGY®
VERTIGAIN technology® allows recording in unparalleled broadcast quality, with up to 10% more clarity & accuracy than other USB microphones.
2 Recording Patterns
Cardioid and Omni-directional. For different application you can choose one of them. Cardioid mode mostly use for Vocal recording , omnidirectional mode for video conference or for meeting applications.
Record audio for your podcast straight to your computer with the Marantz Professional MPM-4000U, a USB microphone geared toward content creators. Bypassing the need for any audio interface, preamp, or mixer, the MPM-4000U lets you record yourself right out of the box, capturing broadcast-quality audio in the process.
Monitor audio straight from the mic with the headphone jack. Use controls typically only found on mixers to tailor the sound: mute the mic, control its gain, and adjust the volume on your headphones independently. The mic ships with a desktop mic stand, a mic clip, and a USB cable to get you up and running right away.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
0.4 X 0.7 mil Diamond Elliptical tip needle , 33 or 45rpm NOT for 78rpm.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 2.5- 3.5 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 2,0 – 3,0 grams tracking pressure
0.7 mil Diamond conical tip needle ,for 78rpm , 3,0 – 5.0 grams tracking pressure
Commandes expédiées en 24 heures