You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
Will fit these Dual turntables models: CS 431, CS450, CS455, CS505, CS515, CS530, CS616, CS620, CS630, CS2210, CS2215, CS2225, CS2235, CS275361, CS280554, CS286945, CS289030
– Oxygen free copper (OFC) for a cleaner sound. All of the terminals are phosphor copper and 24k gold plated for good electrical conductivity and non-allergy reaction. Terminals are hand soldered one by one
– Each wire and terminal is color coded for easy cartridge mounting.
– Mount on cartridge according to the color of the wire.
BLUE = LG (left ground)
GREEN = RG (right ground)
WHITE = L (left positive)
RED = R (right positive)
The Vinyl Record Cleaner kit comes with Black Velvet stylus & Record cleaner and the Cleaning Fluid 2oz.
New high quality super elasticity rubber drive belt
21′ long x 0.20′ width x 0.02′ thick ( 544mm long x 5mm width x 0.5mm thick)
Application: Fits most all 10′ to 13′ diameter platter turntables
Can replace all 21′ to 24.5′ belts (170 to 200mm BELT), Perfect replacement or belt, specs equal or exceed original standards.
New Highest quality turntable belt, 17.2″/43,68 cm Inside Circumference x 0.157″/ 0,40 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
Brand New turntable beltThis is a brand new generic replacement flat rubber belt.- manufactured to meet or exceed the Original Equipment Manufacturers specifications. .025 Inch / .6mm Thick .203 Inch / 5.16mm Wide 25.0 Inch / 63.5cm Inside Circumference (total length)
New Highest quality turntable belt, 18.7″/47,49 cm Inside Circumference x 0.120″/ 0,30 cm Wide x 0.032″/ 0,081 Thick Turntable Belt
High quality Elliptical cartridge made by Grado
The Nagaoka MP-200 phonograph cartridge offers superior clarity, detail and dynamic contrast. Features -Superfine polished special eliptical diamond stylus -Powerfull samarium cobalt magnet -Hardened low-mass, tapered aluminum alloy cantilever for very high fidelity -Carbon fibre reinforced plastic shoe -Anti ferro magnetic permalloy shield casing Stylus replacement: Nagaoka JN-P200 The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.
The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation.
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
0.0007 mil Diamond Sapphire tip needle , 16 or 33 or 45 or 78rpm
High quality Conical needle made by Tonar
0.4 X 0.7 mil Diamond conical tip needle , 33 or 45rpm NOT for 78rpm.
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 3,0 – 5.0 grams tracking pressure
Orders shipped within 24 hours
Diamond .6 mil conical tip needle, 2.5-3.5 grams tracking pressure, 16, 33, 45 not for 78RPM.
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.5 – 2.5 grams tracking pressure
Normarh, Audio Technica, Pfanstiehl
AT-3600, AT-3600L, AT-91, AT3600, AT3600L, AT3601, AT3650, AT3650C, AT3650L, AT3651, AT91
469-D, 470-D, ATN-91
2,5 – 3,5 grams
16, 33, 45
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,25 grams tracking pressure
Audio Technica VMN10CBstylus specified for VM620MONO Cartridge, Aluminum cantilever , 0.6 mil Diamond conical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,0 – 2,0 grams tracking pressure
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm