MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
The Tonar Tacky Cleaner takes an unconventional approach to cleaning records. By having a sticky silicone elastomer surface that deforms when rolling, it can fit in the record grooves and the dust and grime within stick to the tacky cleaner. After use, the rolling cleaner can be cleaned under a tap with water and a little soap, once dry it will be a sticky as new.
The AT-LH15H is a 15-gram universal ½”-mount headshell, optimized to accommodate 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series cartridges. This aluminum headshell with hard anodized finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws, plastic washers, and a hexagonal wrench.
The cartridge is also available in 13-gram (AT-LH13H) and 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements.
Crosley’s Deluxe Record Cleaning Kit
NEW CONNOISSEUR BD-1, BD-2, BD-2/A, BD-2/AR, BD-3 Round Turntable Belt. Top Quality, Long Lasting and Hard to find, RBS32.2 x 0.070″
New Highest quality turntable belt, 27.3″/69,34 cm Inside Circumference x 0.200″/ 0,50 cm Wide x 0.024″/ 0,060 Thick Turntable Belt
NEW Genuine Pro-Ject Essential , Essential II & Essential III Replacement Drive Belt Also compatible with – Elemental/Elemental Phono USB – Primary/Primary Phono USB/Primary E – Essential/Essential Phono USB – Essential II/Essential II Phono USB/Essential II Digital – Essential III/Essential III A – George Harrison Record Player – VT-E – Xtension 9 – Juke Box E – Juke Box S2
NEW Genuine Pro-Ject 2Xperience Replacement Drive Belt
High cost performance. Pop and jazz to the best high-performance, low-cost entry model MP-type stereo cartridge head shell with MP-100H ● output voltage: 5mV 5cm / sec
● frequency response: 20Hz ~ 20KHz
● Channel separation: 22dB 1KHz
● channel balance: 2.0dB following
● load resistance: 47KΩ ● load capacity: 100pF
● cantilever: aluminum alloy
● needle tip: 0.6mil cone and joining diamond
● proper needle pressure: 1.8 ~ 2.3g
● cartridge self-weight: 6.5g
● with head shell its own weight: 15.9g
Audio Technica VM Series dual magnet cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure
The 1022GX cartridge is recommended for the discerning listener as it uses a vital-shank, nude, diamond stylus. This polyhedral, line-contact diamond profile was chosen because it has a very low tip-mass and a large contact area whilst being very narrow from front to back, even enabling the undistorted retrieval of ultrasonic frequencies in a recording. A large contact area means that stylus and record wear are reduced and because it plays lower down in the groove than spherical types, older records may well gain a new lease of life.
The VM540ML MicroLine® stylus cartridge is the premier 500 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM540ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s MicroLine® stylus allows it to trace the record groove with incredible accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match. The stylus’s multilevel shape also wears better than other styli, while reducing the wear on your records.
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
The motiv mv88+ video kit is a premium digital stereo condenser microphone. Your new mobile recording rig directly connects to any apple device via a lightning connector, or via usb-c to select additional devices. The mv88+ has all you need to capture great content right out of the box. The included phone mount is also compatible with your existing set-up, allowing to connect to any standard ¼” tripod. The mv88+ is compatible with: Ios devices, samsung galaxy note 8, samsung galaxy note 9, samsung galaxy s7 (requires additional micro-b cable or otg adapter), samsung galaxy s8/ s8+, samsung galaxy s9/ s9+. Note that not all android devices provide enough power or support usb audio. Note that the mv88+ is not compatible with ipad pro.
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device, and functions seamlessly with your favorite recording software. This large-diaphragm, side-address cardioid condenser reduces pickup of unwanted sounds from the sides and rear, and is equipped with a high-quality analog-to-digital converter (24-bit, up to 192 kHz) for excellent fidelity.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 1,0 – 3,0 grams tracking pressure
.0007 Diamond tip, 16 33 & 45 RPM Only.
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
GRADO 8MZ STYLUS
The Grado 8MZ stylus for the highly regarded Joseph Grado Signature 8MZ phono cartridge, it fits all previous Signature and Prestige models and can be used to improve their performance.
The current Signature replacement styli are identified by the model inscribed on the top of the plastic housing. The stylus is packaged in Grado’s small plastic box with MCZ handwritten on the back.
Original Grado 8MZ Stylus Specifications – Output: 3.5mV @ 3.5 CMV (45 degrees) – Controlled frequency response: 10Hz-50kHz – Channel separation: Average 25dB, 10Hz-50kHz – Stylus: Diamond, twin tip – Input load: 47k Hz – Inductance: 45 mH – Resistance: 475 ohms – Tracking force: 1.5 g – Pick-up weight: 5.5 g – Capacitance: Non-sensitive to capacitive load
Orders shipped within 24 hours
0.7 mil Diamond Sapphire tip needle , 16 or 33 or 45rpm or 78rpm
$ 32.95
White
BSR, Pfanstiehl
Sapphire
no
ST160, ST17
274-DS73, 52-D
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1.25 grams tracking pressure
Replacement JNP200 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip
Audio-Technica AT-VMN95E stylus specified for AT-VM95E cartridge, Special elliptical diamond tip for good fidelity , 0.3 x 0.7 mil Diamond Elliptical needle , 1.8 – 2.2 grams tracking pressure
Audio Technica VMN20EBstylus specified for VM520EB Cartridge, Aluminum cantilever , 0.3 x 0.7 mil Diamond elliptical needle, 1.8-2.2 grams (2.0 g standard) tracking pressure