MY ACCOUNT
WISHLIST
COMPARE LIST
Hello.
Username*
Password*
Lost password?
Email*
There have been a broom since the early 70s and do their job sometimes well but less well. A commonly observed phenomenon is the so-called “storm”, or “skating”, the broom arm towards the center of the plate without running synchronously with the sampling needle. The latest developments therefore also consistently rely on measures that prevent exactly that. With the highly effective neodymium magnet a material has been available for quite some time, which can be used right here. Sweep it S2 was developed in collaboration with Klaus Mick and uses its patented principle to magnetically stabilize the broom An intensive research and development of technical and physical properties and empirical experimental arrangements have led to the product that you hold straight in your hands.
Digital Stylus Pressure Gauge LKG’s own digital stylus force gauge is easy to use and accurate to within 0.01 grams. Maximum weight 5g
The AT618a disc stabilizer fits over the turntable spindle to hold records firmly in place, reducing resonance and improving sound quality. The stabilizer is constructed of machined brass with a protective rubber cover. WEIGHT: 600 Grams
You will receive a top quality turntable headshell that is ready to plug into most S-shaped or straight tonearms. You can be up and spinning in moments. If you have an empty round socket at the end of your tonearm this headshell will fit. It will just plug right into the round tonearm socket as you rotate the locking collar. Size : 8 mm diameter x 12 mm length Plated 4-pin contacts Four colour-coded OFC (oxygen free copper) soft leadwire with gold plated terminal Every terminal inside a color sleeve
Turntable and phonograph record player Belt 14″
New Highest quality turntable belt, 17.2″/43,68 cm Inside Circumference x 0.157″/ 0,40 cm Wide x 0.023″/ 0,058 Thick Turntable Belt
New Highest quality turntable belt, 14.4″/36,57 cm Inside Circumference x 0.197″/ 0,50 cm Wide x 0.025″/ 0,063 Thick Turntable Belt
The AT-XP7 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 6.0 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.
This is a very popular cartridge, found in most modern nostalgic type players. and dating back a decade or so across many brands. Noteably Chou Denshi CZ-800, & soundesign among others. Specs: Tracking Pressure: 2 – 4 grams Element: Ceramic .4 Volts Output
The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.
The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings
The VM750SH Shibata stylus cartridge is a premier 700 Series model in Audio-Technica’s
LEGENDARY SOUND + GREAT FIT
After 60+ years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize the headphone industry. Since 2007 we have been creating the most innovative headphones on the market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary home theater speakers provide the performance, voice and design for the T5 II Series earphones. They are engineered for pure performance and designed to be the best sounding most comfortable earphones on Earth and the embodiment of legendary Klipsch sound
The AT-HPH300 Headphone Hanger is a convenient tool for safely storing your headphones in areas where space is limited. The hanger features an adjustable clamp that mounts securely to a shelf, desk or other surface up to 3.5 mm (1.4″) thick. The hanger rotates 360°, allowing you to store headphones unobtrusively under the desk or shelf, or have out and at the ready to quickly grab when needed. And with the hanger’s soft leatherette pad, you never have to worry about your headphones getting scratched or damaged. A great space-saving solution.
DesignClosed-back dynamic
Touch Control✓
Driver Diameter45 mm
Frequency Response15 – 28,000 Hz
Battery LifeApprox. 40 hours continuous use
Charging TimeApprox. 7 hours (for 0-100% charge)
MicrophoneOmnidirectional condenser
Communication SystemBluetooth Version 5.0
Support CodecaptX, AAC, SBC
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
With Thronmax Fireball, quick and easy recording is finally a reality. Simply mount Fireball on the included sticky pad stand, plug the USB cable into your Mac or PC and that’s it. You’re ready to sit back and start recording crystal-clear audio for any recording or live streaming.
Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP (Home and Professional), and Mac OS X (10.4.11 or higher), and requires a minimum of 64 MB of RAM
The MPM-1000U is perfect for podcasting applications or recording high-quality audio directly to a computer or digital audio workstation (DAW). The built-in driver enables plug-and-play USB performance, and its smooth frequency response will put the finishing touch on any project.
The ATR2100x-USB is a versatile content creation microphone, designed for live performance, podcasting, and voiceover use. This rugged handheld microphone offers two outputs: a USB output that connects to your computer or other device for digital recording, and an XLR output that connects to a sound system’s conventional microphone input for use in live performance.
0.6 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 – 2,5 grams tracking pressure
High quality Elliptical needle made by Tonar
0,3 mil Diamond conical tip needle ,ONLY for 78rpm , 1.0 – 3,0 grams tracking pressure
0.3 X 0.7 mil Diamond Elliptical tip needle , 16 or 33 or 45rpm NOT for 78rpm , 1,5 grams tracking pressure
Orders shipped within 24 hours
0.007 mil Diamond Sapphire tip needle , ONLY for 78rpm
$ 22.95
Grey
Normarh, Pfanstiehl, Tetrad
Sapphire
no
11-10328-9, 11103289, 33-464, 33-465, 33464, 33465, 671V039B03, 8856, 8860, 8862, 8906, 8908, 8912, 8914, 8916, 8921, 8934, 8939, 92813, 92814, A514, GT21398, T-3 M, T3M
78 RPM
201-D2, M854-DS73
4,0 – 6,0 grams
0.7 mil Diamond conical tip needle , 16 or 33 or 45rpm NOT for 78rpm, 1,0 – 3,0 grams tracking pressure
Replacement JNP200 stylus with spherical tip and aluminium alloy cantilever. Stylus: 0.4 x 0.7 Mil naked elliptical block diamond stylus tip
Audio-Technica ATN-91R stylus specified forAT91R and CN5625AL cartridges, Special conical diamond tip for good fidelity ,06 Diamond conical Replacement Stylus with Bonded Round Shank , 2 – 4 grams tracking pressure
Audio-Technica ATN91 stylus specified for AT91 cartridges, Special conical diamond tip for good fidelity ,0.6 mil Diamond Conical needle , 1.5 – 2.5 grams tracking pressure